Threaded Mode | Linear Mode

Taz · 02-08-2019, 05:01 AM

Hi guys,

Is there are any standard for the surface roughness measurement methods?
I want to know what is the cut-off length use for certain range of roughness requirement.

Lemster68 · 02-08-2019, 07:01 PM

Try Here: https://www.astm.org/Standards/D7127.htm

Possibly Related Threads...
Thread:		Author	Replies:	Views:	Last Post
	WC-CO-CR hvof coating thickness measurement on Base SS 316L	JRB VIRANI	3	485	06-20-2019 09:16 AM Last Post: loriolo
	roller surface high roughness Tungsten carbide coating Ra 0.15-0.3mm	zhuminkun	6	1,331	02-08-2019 04:59 AM Last Post: Taz
	Coating Thickness Measurement Equipment	Taz	1	712	01-09-2019 07:46 PM Last Post: Lemster68
	Roughness and particle size	hustzc	5	5,000	07-05-2018 06:39 PM Last Post: velocity
	Aluminum roughness	sprayloud	4	1,325	02-20-2018 07:38 AM Last Post: sprayloud
	Coating surface roughness	William	9	18,472	12-26-2017 10:40 AM Last Post: Vadim Verlotski
	Plasma Spray 60% Alumina- 40% Titania Roughness	Hector Monjardin	1	1,553	06-29-2016 10:42 PM Last Post: Hector Monjardin
	Copper wire arc spray surface roughness	operator	10	7,095	09-10-2013 09:06 AM Last Post: Esteban
	What is the correct EN standard for the Tensile Testing of 18CrNiMo7-6?	Anand Trivedi	0	2,381	10-09-2012 06:52 PM Last Post: Anand Trivedi
	Surface roughness after grit blasting	Leanne	8	19,415	08-15-2012 05:28 AM Last Post: Leanne
	Diamalloy 2004 surface roughness problem	Khairul Anwar	1	3,916	07-12-2011 10:10 AM Last Post: Gordon
	Improving Surface Roughness of Polypropylene and Measuring Surface Roughness	kat.rawlings	14	21,500	03-01-2011 09:18 AM Last Post: kat.rawlings
	roughness of CRC TS Coating	mehongbo	3	4,773	10-14-2010 09:56 AM Last Post: Amanda
	Obtaining surface roughness requirement (and hardness > 1000 HV)	vrakpant	3	5,345	04-25-2010 01:37 PM Last Post: Gordon
	Thickness Measurement of Sprayed Monel	wrjordan	15	13,173	11-08-2009 05:40 AM Last Post: k09