Surface Engineering Forum

  • Alternative Forum Home PageSEF Portal
  • Old S E Message Board ArchivesOld Message Board Archives
  • Search
  • Member List
  • Calendar
  • Help

Current time: 02-17-2019, 07:11 AM Hello There, Guest! (Login — Register)


Surface Engineering Forum / Surface Engineering / Surface Engineering Threads v
« Previous 1 ... 19 20 21 22 23 ... 31 Next »
/ Repair Pump Shaft on Base Material Nitronic50




Post Reply 
Threaded Mode | Linear Mode
Repair Pump Shaft on Base Material Nitronic50
02-06-2010, 08:19 AM
Post: #1
Piyapong Offline
Junior Member
**
Posts: 3
Joined: Dec 2009
Reputation: 0
Repair Pump Shaft on Base Material Nitronic50
Hi,

Pump Shaft Dia.45 mm x 6000 mm length.
Base Material : Nitronic50
Application with ethylene pure & working temp should be around -100 C

Help identify material & process to be use with data above.

Thanks!!

PPK
Send this user an email Find all posts by this user
Quote this message in a reply
03-03-2010, 05:53 PM
Post: #2
djewell Offline
SuperMember
******
Posts: 239
Joined: Jan 2008
Reputation: 6
RE: Repair Pump Shaft on Base Material Nitronic50
(02-06-2010 08:19 AM)Piyapong Wrote:  Hi,

Pump Shaft Dia.45 mm x 6000 mm length.
Base Material : Nitronic50
Application with ethylene pure & working temp should be around -100 C

Help identify material & process to be use with data above.

Thanks!!

PPK

You can buy Nitronic50 wire, or you could substitute 18-5 SS wire. The chemistry is very close.
Send this user an email Find all posts by this user
Quote this message in a reply
« Next Oldest | Next Newest »
Post Reply 




Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Ceramic Coating on Aluminum Base metal demionkrishan 4 235 01-17-2019
07:22 PM
Last Post: Lemster68
  Material Required Calculation Help connoramcguigan 3 310 11-21-2018
09:43 PM
Last Post: sprayloud
  Suitable material model to predict mechanical performance iniyanthiru 0 245 09-22-2018
09:15 AM
Last Post: iniyanthiru
  Defect Missing Material and Coating Failure achmadarifudinh 2 820 02-12-2018
05:47 AM
Last Post: achmadarifudinh
  Propeller shaft repair by flame spray in the cones area Iwan Sedaryawan CA 1 1,055 12-09-2016
04:56 AM
Last Post: Stephen Booth
  Good preparation for cast iron base material plzc126330 3 1,459 11-24-2016
01:17 AM
Last Post: plzc126330
  Need Help selecting Correct Coating Material gsfraser 6 2,105 10-10-2016
08:40 PM
Last Post: MVagusta
  MCrAlY on steel for general repair MVagusta 2 1,595 08-05-2016
10:06 AM
Last Post: Vig
  Coating material kim jong hun 4 2,476 06-28-2016
01:32 AM
Last Post: kim jong hun
  Plunger Repair with WC coating sal 8 3,793 04-26-2016
10:54 PM
Last Post: pakalano
Video Repair of base material defect after HVOF Coating Pranab_hvof 1 2,072 06-20-2015
06:45 PM
Last Post: Johnny_Blaze
  sulzer (metco) repair book sal 0 1,522 04-12-2015
04:53 AM
Last Post: sal
  Plungers for mud pump shantanu 1 1,825 02-19-2015
03:04 AM
Last Post: Axis Machine
  Coating solution needed for slurry pump application Killswitch 11 7,411 02-19-2015
02:57 AM
Last Post: Axis Machine
  Lathe Bed Scratch repair shantanu 5 4,934 11-20-2014
10:11 PM
Last Post: loriolo

  • View a Printable Version
  • Send this Thread to a Friend
  • Subscribe to this thread


User(s) browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd

    Subscribe in a reader

    Contact Us | Thermal Spray Coatings | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication

Powered By MyBB, © 2002-2019 MyBB Group.


© Copyright Gordon England