Remove HVOF Coating in airfoil surface blade
07-10-2018, 09:24 AM,
#1
Remove HVOF Coating in airfoil surface blade
Good afternoon, guys.

I have case in my workshop that the coating from HVOF so hard to be remove with sand blasting alox 60.

This HVOF coating in gas turbine blade. I'm afraid if i increased the pressure there will be damage to the airfoil surface of blade.

Im seaching that abrasive water jet will be solve my case in HVOF coating.

Maybe any equipment or other method for remove the HVOF coating with a small posibility to damage in airfoil surface of blade ???

Thanks
Regards.

Achmad Arifudin H
Reply
07-10-2018, 03:59 PM,
#2
RE: Remove HVOF Coating in airfoil surface blade
(07-10-2018, 09:24 AM)achmadarifudinh Wrote: Good afternoon, guys.

I have case in my workshop that the coating from HVOF so hard to be remove with sand blasting alox 60.

This HVOF coating in gas turbine blade. I'm afraid if i increased the pressure there will be damage to the airfoil surface of blade.

Im seaching that abrasive water jet will be solve my case in HVOF coating.

Maybe any equipment or other method for remove the HVOF coating with a small posibility to damage in airfoil surface of blade ???

Thanks
Regards.

Achmad Arifudin H

Once i had to re-coat these parts from cement plant hvof coated 88/12.
Blasting it was a waste of time. What i did was i heated it in furnace to 100 or 150 degrees C and threw them into water. The surface of the coating cracked into a web and was easy to remove mechanically like knife or smf like that.
I am not sure you can do this with turbine blades as this might change the blades mechanical properties in some undesired way.

Reply
07-11-2018, 01:32 AM,
#3
RE: Remove HVOF Coating in airfoil surface blade
(07-10-2018, 03:59 PM)sprayloud Wrote:
(07-10-2018, 09:24 AM)achmadarifudinh Wrote: Good afternoon, guys.

I have case in my workshop that the coating from HVOF so hard to be remove with sand blasting alox 60.

Once i had to re-coat these parts from cement plant hvof coated 88/12.
Blasting it was a waste of time. What i did was i heated it in furnace to 100 or 150 degrees C and threw them into water. The surface of the coating cracked into a web and was easy to remove mechanically like knife or smf like that.
I am not sure you can do this with turbine blades as this might change the blades mechanical properties in some undesired way.

Wow, what part you do it ??
Are you used another chemical solution when you rinse in your method ??

thanks.

Reply
07-11-2018, 05:45 AM,
#4
RE: Remove HVOF Coating in airfoil surface blade
Good afternoon. If yoiu do a search of the SEF, similar to http://www.gordonengland.co.uk/sef/searc...order=desc you can find much info on chemical stripping
Reply
07-14-2018, 11:40 AM,
#5
RE: Remove HVOF Coating in airfoil surface blade
Achmad Arifudin H,
Chemical Stripping is the best method for stripping coating on Turbine blades. or you need to have waterjet.
The Process will be, Sand Blasting, Stripping, Baking to remove putty also able identify the remaining coating,Pre weld Solution Heat treatment, Welding / cladding and Matching, Post weld HT , HVOF Spray, Solution and Age Heat treatment, Shot pinning....
If you want to know more about chemical Stripping send me a mail to demionkrishan@yahoo.com

Regards,
DK
Reply
07-20-2018, 10:51 AM,
#6
RE: Remove HVOF Coating in airfoil surface blade
(07-14-2018, 11:40 AM)demionkrishan Wrote: Achmad Arifudin H,
Chemical Stripping is the best method for stripping coating on Turbine blades. or you need to have waterjet.
The Process will be, Sand Blasting, Stripping, Baking to remove putty also able identify the remaining coating,Pre weld Solution Heat treatment, Welding / cladding and Matching, Post weld HT , HVOF Spray, Solution and Age Heat treatment, Shot pinning....
If you want to know more about chemical Stripping send me a mail to demionkrishan@yahoo.com

Regards,
DK

Thanks for explain demion, but in my company we cant do chemical stripping, caused enviromental local regulatory. but i want to know more about water jet. maybe any case or sample HVOF coating removal by water jet cleaning.

Thank you.
Regards.

Achmad Arifudin H

Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
Lightning WC10Co4Cr HVOF coating leaves some lumps on the surface tobjung 1 454 10-17-2023, 07:32 AM
Last Post: Vadim Verlotski
  Surface corrosion when HVOF spraying vcduramais 4 2,107 08-20-2021, 11:25 AM
Last Post: vcduramais
  surface speed for HVOF coating process gito 8 5,575 05-03-2019, 01:08 PM
Last Post: Lemster68
  remove tungsten coating gito 1 2,360 03-22-2019, 10:12 PM
Last Post: sprayloud
  Coating for cyclone internal surface Arturas 0 1,883 12-11-2018, 06:58 AM
Last Post: Arturas
  Coating surface roughness William 9 26,622 12-26-2017, 10:40 AM
Last Post: Vadim Verlotski
  Powder Coating for Surface Table achmadarifudinh 3 3,749 11-28-2017, 12:19 PM
Last Post: Artyom
  Un-common surface pattern on coating failure shantanu 2 3,675 10-06-2016, 02:55 PM
Last Post: Vig
  Boron Carbide as a Surface Coating TCHP222 0 3,759 11-12-2015, 08:06 PM
Last Post: TCHP222
  Metco 450 coating surface problem Yaakov 2 6,721 05-06-2015, 01:54 PM
Last Post: loriolo
  HVOF coating over Induction Hardened surface shantanu 1 3,921 01-30-2015, 08:17 PM
Last Post: djewell
Rolleyes Discontinuities on HVOF surface Gabriel AM 3 4,845 05-29-2014, 08:22 PM
Last Post: KevinS
  Surface contact stress limit over an HVOF coating HVoilF 1 5,189 05-22-2013, 02:07 PM
Last Post: djewell
  Surface Speeds and traverse for coating Cro-167 js2know 2 6,500 12-23-2011, 02:15 PM
Last Post: Gordon
  Surface prep issues before APS coating msiranni 6 7,514 06-21-2011, 12:56 PM
Last Post: Justin



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd