Threaded Mode | Linear Mode

Vijay Deshpande · 12-16-2007, 05:37 PM

Dear All,
i woluld like to know about capital cost and running cost comparison between D-gun systems and JP 5000 HVOF syastem
thanks
Vijay deshpande

***Gordon*** · 12-17-2007, 01:34 AM

Hi Vijay

I can only suggest collecting information from the equipment manufacturers (with a few of your most used coatings in mind). Information needed would be gas/fuel/power/water consumption and also not forgetting deposit efficiencies and spray rates for your selected coatings. Consumable part cost and life should also be considered. Capital cost, well you can't beat getting a quote from the seller. Big Grin

Possibly Related Threads...
Thread:		Author	Replies:	Views:	Last Post
	Is it possible to spray powder established for gas based HVOF in Fluid HVOF system??	sreenuvundela	0	1,501	04-18-2016 07:52 AM Last Post: sreenuvundela
	Cost of thermal spray sensors	Lalit	1	2,251	01-03-2015 05:55 AM Last Post: Manish Choudhary
	APS gun runing cost	Ramin	2	1,769	05-05-2014 01:03 PM Last Post: Ramin
	High power plasma comparison	plzc126330	0	1,738	07-02-2013 09:11 AM Last Post: plzc126330
	Dual wire arc spray systems	MET-ELITE	3	5,939	05-11-2009 12:33 PM Last Post: Stuart Milton
	Black coated aluminum fin & Hydrophilic coated aluminum fin comparison	Lumbantoruan	3	10,063	01-30-2009 07:51 AM Last Post: Lumbantoruan
	HVOF RUNNING COSTS	Vijay Deshpande	1	3,421	06-24-2008 12:30 AM Last Post: Gordon
	Cost of AMPERIT 518 and 526??	dibyendudhara	1	3,170	04-23-2008 05:31 PM Last Post: Gordon
	Coated abrasives grading systems: FEPA, mesh, micron	Rogier	3	13,391	06-29-2007 04:20 PM Last Post: Gordon