ROLL CONDUCTOR (HVOF POWDER)
09-28-2010, 07:18 AM,
#1
ROLL CONDUCTOR (HVOF POWDER)
Hi Gordon and surface engineering members,

We have a conductor roll to be coated with HVOF process. From recorded, the roller had been coated with some sort of tungsten carbide HVOF powder. But the problem is, we are unable to search the powder. Therefore, i seek your kindness to assist me on this matter.

FYI, the powder is :

1. 44.70%W, 0.3%Ni, 34.5%Cr, 19.90%Ni.

Really appreciated your prompt action.

Regards,
Minja
Reply
10-04-2010, 07:27 AM,
#2
RE: ROLL CONDUCTOR (HVOF POWDER)
Hi Minja

Not sure about your composition as you have two entries for Ni.

At a guess maybe a tungsten carbide/chromium carbide/nickel chromium powder.
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
Shy HVOF Coating Calender Roll issues. Suggestion needed tobjung 4 2,617 07-24-2021, 08:53 AM
Last Post: tobjung
  Hvof on conductor rolls for electric tin lines Danmarco 4 4,395 11-16-2016, 03:37 PM
Last Post: shantanu
  HVOF Powder HMB 2 4,811 04-19-2016, 04:35 AM
Last Post: HMB
  Is it possible to spray powder established for gas based HVOF in Fluid HVOF system?? sreenuvundela 0 3,478 04-18-2016, 07:52 AM
Last Post: sreenuvundela
  Poor flame with Ni-based metallic powder - HVOF process Roy 2 4,600 02-26-2016, 12:30 AM
Last Post: Roy
  HVOF DJ2600 DJ8W powder feeder issue vetrinit 5 8,414 06-17-2015, 04:39 PM
Last Post: loriolo
  Copper powder spray by HVOF mlavar 5 6,748 05-16-2014, 03:46 PM
Last Post: djewell
  accumulation of powder in hvof nozzle mlavar 7 8,067 06-29-2013, 07:35 AM
Last Post: mlavar
  Hastelloy C275 HVOF powder Vijay Deshpande 1 4,858 04-08-2013, 12:03 PM
Last Post: loriolo
  HVOF powder for Impeller minh_8888 5 7,187 07-23-2011, 12:23 AM
Last Post: minh_8888
  HVOF Powder for Block Engine and Cylinder Liner minh_8888 1 4,371 06-21-2011, 02:28 PM
Last Post: Met.Eng.
  HVOF on CAST IRON ROLL Guna 1 5,799 10-04-2010, 07:37 AM
Last Post: Gordon
  least powder amount used in HVOF process hustzc 1 4,049 06-23-2010, 12:35 PM
Last Post: Gordon
  Powder fluidity and injector clogging (DJ 2700 HVOF gun). pulaunias 7 12,818 04-19-2010, 03:16 PM
Last Post: Gordon
  Conductor Roll -- Copper Coating Stephen Booth 3 9,955 02-27-2010, 04:52 AM
Last Post: Stephen Booth



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd