Threaded Mode | Linear Mode

Vijay Deshpande · 12-31-2007, 04:50 PM

Dear all,
recently i was execting a job for coating ID of 36" pipe line for a customer.We had left 4'' from both sides for carrying out welding and spraying field joints. how ever due to fit up problems pipe was required to cut in the Sprayed portion. We tried to remove coating with Blasting but witch was taking lot of time. After that we ground off to prepare the joint. Is there any chemical method where sprayed coating can be leached away
Vijay

***Gordon*** · 01-02-2008, 01:44 PM

Hi Vijay

Sodium hydroxide solution (~ 75g/l of water @ 40C) should remove /degrade aluminium coating at roughly 1mm/hr without significant damage to steel substrates. My concern would be, that if you want to remove only part of the coating, protecting the coating area to be left will be a big problem.

Vijay Deshpande · 01-03-2008, 04:49 PM

Dear Gordon,
I will try out this procedure on test plates before applying on to actual job.
Thanks
Vijay Desh

Possibly Related Threads...
Thread:		Author	Replies:	Views:	Last Post
	How to removal 45VFNS coating?	stvon	0	408	07-04-2018 03:01 PM Last Post: stvon
	removal or stripping of coatings	mountprat	16	25,214	06-24-2016 06:54 AM Last Post: James Chua
	Methods for removal of W-, Ni- and V-coating	kahrax	15	15,153	01-28-2015 07:53 PM Last Post: PrecisionCarbide
	Tungsten Carbide HVOF Removal	PrecisionCarbide	8	6,290	01-15-2015 01:26 PM Last Post: J.L.
	Removal of grit after grit-blasting?	pulaunias	11	14,719	06-18-2010 01:52 AM Last Post: Gordon
	Removal of Galvenised coating	Vijay Deshpande	1	2,824	01-26-2009 05:02 PM Last Post: Gordon
	HVOF T800 removal	finnie	2	8,483	12-16-2008 01:08 PM Last Post: kurtecard
	88WC - 8Co - 4Cr Removal Advice	Batsy	2	5,474	02-05-2007 09:21 AM Last Post: Batsy