Proper mixing of NiCrBSi with WC/Co
12-18-2013, 09:07 AM,
#1
Proper mixing of NiCrBSi with WC/Co
Hello,
We use NiCrBSi+WC/Co powders for flame spraying . Mixing of two materials NiCrBSi and WC/Co we perform ourselves. We make assumption that our mixing of two grades powders is not correct and properties of coating also. The question is how mixing procedure of powders should be done properly. Maybe someone know standart or special 3 axis machine for such procedure.

Best wishes to everyone
Arturas
Reply
01-02-2014, 06:40 AM,
#2
RE: Proper mixing of NiCrBSi with WC/Co
(12-18-2013, 09:07 AM)Arturas Wrote: Hello,
We use NiCrBSi+WC/Co powders for flame spraying . Mixing of two materials NiCrBSi and WC/Co we perform ourselves. We make assumption that our mixing of two grades powders is not correct and properties of coating also. The question is how mixing procedure of powders should be done properly. Maybe someone know standart or special 3 axis machine for such procedure.

Best wishes to everyone
Arturas

Dear Arturas,
Very important Thermal Spray Equipment and powder combination for mixing.
For Examble: DJ Gun: WC/Co (-38+10 micron) + NiCrBsi (-45+15 mic)
JP-5000:WC/Co (-45+15 mic. + NiCrBSi (-53+20 mic.)
Regards
Turgut
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  NiCrBSi coating by DJ2600 Zhao Yun 6 1,291 12-05-2022, 03:43 AM
Last Post: Zhao Yun
  WC-Co+NiCrBSi Applying on hydraulic piston rod Met.Eng. 4 4,821 05-09-2016, 05:45 PM
Last Post: Vadim Verlotski
  How to Fuse a NiCrbSi (16C) in a oven? Joris Kraak 4 6,165 04-01-2014, 05:47 AM
Last Post: Stephen Booth
  Mixing powder and Time duration for sieve shaker?????????? fahad03092 5 6,887 10-24-2011, 11:53 PM
Last Post: fahad03092
  After mixing, do we need to sieve the powder for plasma spray??? fahad03092 1 4,371 10-18-2011, 06:38 PM
Last Post: Gordon
  WC\Co + NiCrBSi Met.Eng. 2 5,341 05-05-2011, 02:33 PM
Last Post: A.Termika Ltd
  [split] NiCrBSi - Abrbreviations bhellman 1 5,790 07-19-2007, 12:13 AM
Last Post: Gordon
  NiCrBSi lenicacraint 8 14,373 07-18-2007, 10:58 PM
Last Post: Gordon



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd