Nickel based powder

Threaded Mode | Linear Mode

Nickel based powder

04-02-2015, 05:24 PM

Post: #1

Steamhammer Offline

Junior Member

Posts: 3
Joined: Mar 2015
Reputation: 0

Nickel based powder

Are there any nickel based powders out there that have good wetting properties for solder? I've tried the metco 450 and a 100% nickel powder, but couldn't get any solder to flow, with flux of course.

« Next Oldest | Next Newest »

Possibly Related Threads...
Thread:		Author	Replies:	Views:	Last Post
	Powder build up on powder port	ruudlam	1	445	09-14-2018 12:10 PM Last Post: Vadim Verlotski
	Sulzer Metco 58NS Copper-Nickel-Indium alloy powder question	RaymondF2	1	630	09-05-2018 04:35 PM Last Post: ServiceTech
	Amdry 9954 for titanium based alloy	Bharti Malvi	6	2,533	12-21-2016 07:39 PM Last Post: Bharti Malvi
	Materials based on PTFE	plasmajet1990	0	1,086	04-24-2016 11:47 AM Last Post: plasmajet1990
	Is it possible to spray powder established for gas based HVOF in Fluid HVOF system??	sreenuvundela	0	1,718	04-18-2016 07:52 AM Last Post: sreenuvundela
	Poor flame with Ni-based metallic powder - HVOF process	Roy	2	2,297	02-26-2016 12:30 AM Last Post: Roy
	Stellite (Cobalt Based) that resist against Coal @ 1200deg C	Iwan Sedaryawan CA	2	2,314	12-12-2014 01:11 PM Last Post: Iwan Sedaryawan CA
	High Carbon Iron Based Wire proporties (Metco 8222)	Met.Eng.	3	3,931	05-03-2014 08:49 AM Last Post: plasmajet1990
	Stripping HVOF Nickel Bound	SSC	6	4,239	02-26-2014 11:24 PM Last Post: FWisniewski
	Stripping HVOF Nickel Bound	SSC	3	3,203	04-01-2013 11:33 AM Last Post: SSC
	Silicone based sealer for stainless steel arc spray	pappabearlee	6	5,612	11-30-2012 01:58 PM Last Post: MichiganMan
	Nickel Aluminide on Platinum	k09	7	5,246	03-15-2010 06:11 PM Last Post: Gordon
	loss on nickel during hvof process	twortham	1	2,746	09-16-2009 03:19 PM Last Post: Gordon
	Hardfacing nickel based powders to AISI 431 Stainless Steel	attin	10	11,696	04-28-2009 02:26 PM Last Post: djewell
	Interface separation in Copper Nickel Indium coating	Donald	10	14,017	04-26-2009 02:30 AM Last Post: Donald

User(s) browsing this thread: 1 Guest(s)