Threaded Mode | Linear Mode

CHI3 · 07-01-2016, 11:47 AM

I would like to get some of you guy's thoughts on using NiAl (75b) arc spray wire instead of NiAl (450NS) plasma. What are some pros and cons?

Vadim Verlotski · 07-01-2016, 05:11 PM

(07-01-2016 11:47 AM)Chico Wrote: I would like to get some of you guy's thoughts on using NiAl (75b) arc spray wire instead of NiAl (450NS) plasma. What are some pros and cons?

Plasma spray yields better NiAl-layers, but is slightly more expensive than arc spray.

Possibly Related Threads...
Thread:		Author	Replies:	Views:	Last Post
	Plasma System Inquire	Chever.Cai	0	361	06-20-2019 06:13 AM Last Post: Chever.Cai
	Inconel 625 Plasma Sprayed Compressor Cylinder (ID)	demionkrishan	4	617	06-17-2019 01:32 PM Last Post: demionkrishan
	plasma booth fire suppression	kullboys	1	488	04-25-2019 12:52 PM Last Post: loriolo
	Helium Alternative for Plasma Spray	Abilash	2	726	02-18-2019 03:51 PM Last Post: Lemster68
	Plasma gun with Sweep air	gibum.park	0	524	12-12-2018 06:03 AM Last Post: gibum.park
	oxide cluster in NiCrAl plasma coating	Zhiguo	5	4,751	09-26-2018 04:48 PM Last Post: bpls670
	Plasma Spray Masking Tape	achmadarifudinh	2	767	09-06-2018 02:48 AM Last Post: achmadarifudinh
	Environmental affect on plasma sprayed coatings	nshepher	0	705	06-26-2018 09:43 PM Last Post: nshepher
	Arc Spray and then Plasma spray? Is this common?	cancun555	2	1,267	06-23-2017 07:11 AM Last Post: loriolo
	plasma booth fire suppression	CHI3	1	1,294	03-19-2017 06:00 AM Last Post: loriolo
	Metco 15F by Plasma F4	anne	1	2,296	10-06-2016 09:56 PM Last Post: loriolo
	Molibdenum sprayed by plasma	anne	3	2,746	10-06-2016 02:31 PM Last Post: MarkL
	Cr2O3 chromium oxide spray problems by Plasma	anne	9	5,223	08-01-2016 08:15 PM Last Post: anne
	Plasma Spray 60% Alumina- 40% Titania Roughness	Hector Monjardin	1	1,669	06-29-2016 10:42 PM Last Post: Hector Monjardin
	Inert gas shrouded plasma spray	MartyMc	1	2,076	06-23-2016 11:08 PM Last Post: loriolo