Need help with microstructure
01-02-2017, 10:35 AM
|Need help with microstructure
I need an help in how to remove lines appearing between mount and coating in microstructure taken in 200X .
Powder used is stellite-12(HVOF spray)
Polishing method : Final polishing usind DAC (0.5-1micron diamond paste)
Note: If i replace the final polishing method using Chem pad and OPS solution then i dont get lines which i got using diamond paste (Water soluble)
Any help would be great .......... Thanks
03-08-2017, 04:47 AM (This post was last modified: 03-08-2017 04:48 AM by KevinS.)
|RE: Need help with microstructure
(01-02-2017 10:35 AM)hereticgame Wrote: Hello Everyone!The grinding steps between your initial course grind and the final find grind are either missing steps or are lacking in time, Suggest you either add steps or increase time as all you are seeing is left over damage from a coarse grinding operation. This is assuming your pressures are about 20-25N.
(01-02-2017 10:35 AM)hereticgame Wrote: Hello Everyone!
|Possibly Related Threads...|
|Turbulent 450ns Microstructure.||alvliew||10||1,752||
Last Post: Joris Kraak
|improving 72FNS microstructure||bigals||12||6,374||
Last Post: alan brown
|WC/Co Coating Microstructure||kriskros||13||6,657||
Last Post: sreenuvundela
|Melting, unmelted AlSi Microstructure Amdry 2010 powder||William||4||3,194||
Last Post: Gordon
User(s) browsing this thread: 1 Guest(s)