Miller Thermal Plasma spray system
06-17-2015, 06:32 AM,
#1
Miller Thermal Plasma spray system
Dear All,
I am in the process of re commissioning one old Miller Thermal Plasmatron Plasma spray system. The Plasma gun starts with Argon and go up to 700 amps. How ever once Hydrogen Flow is started to increase Arc Voltage, The machine trips.
What could be reason?
Vijay Deshpande
Reply
06-17-2015, 04:15 PM,
#2
RE: Miller Thermal Plasma spray system
Hi Vijay
Some things, the first is what about electric power supply, is it stable or has some noises, like harmonic, the second, which torch do you use, if you start Hydrogen flow at about 700 amps, this like a little wrong, because Hydrogen flow will be started at about 250/300 amp, and very slowly you must increase the H2, while increase the amps (ever slowly), if not your plasma could not reach the perfect stability, and you can destroy the torch components.
Best regards
Luigi
Reply
06-20-2015, 06:19 PM,
#3
RE: Miller Thermal Plasma spray system
(06-17-2015, 06:32 AM)Vijay Deshpande Wrote: Dear All,
I am in the process of re commissioning one old Miller Thermal Plasmatron Plasma spray system. The Plasma gun starts with Argon and go up to 700 amps. How ever once Hydrogen Flow is started to increase Arc Voltage, The machine trips.
What could be reason?
Vijay Deshpande

The power supply tripping is a safety feature, you are exceeding the maximum voltage limitations of the power supply.

As suggested above...introduce your H2 slowly below 300A and adjust to the desired power settings.

700A is a little high...any reason in particular you are using a high amperage with H2 as the secondary gas?

Regards,
John
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
Lightbulb How does gas-shroud HVOF (warm spray) system work? Lalit 5 6,223 02-17-2023, 09:25 PM
Last Post: J!m
  Fusing Process: Frame Spray vs Plasma Spray tobjung 2 1,145 09-07-2022, 01:22 PM
Last Post: Gordon
  Buy a plasma system kaizmoto1489 0 2,292 06-07-2021, 04:34 AM
Last Post: kaizmoto1489
  Plasma System Inquire Chever.Cai 0 1,830 06-20-2019, 06:13 AM
Last Post: Chever.Cai
  Twin Arc spray system ( request for your recommendation) demionkrishan 0 1,765 03-04-2019, 10:22 PM
Last Post: demionkrishan
  Arc Spray and then Plasma spray? Is this common? cancun555 2 3,078 06-23-2017, 07:11 AM
Last Post: loriolo
  Rotating Plasma Spray Gun MarkL 2 4,644 06-08-2016, 06:52 AM
Last Post: MarkL
  Metallicity of Plasma spray plzc126330 2 4,128 12-17-2015, 10:34 AM
Last Post: loriolo
  Plasma spray using Kerblack Hector Monjardin 4 5,120 07-30-2015, 05:43 PM
Last Post: loriolo
  INFO ON ROKIDE SPRAY SYSTEM ehasan 11 23,030 07-10-2015, 07:39 AM
Last Post: shantanu
  Water Plasma Spray System sreenuvundela 0 3,348 03-12-2014, 06:26 AM
Last Post: sreenuvundela
  we need plasma coating system adovaeloksal 3 5,258 11-03-2013, 02:46 PM
Last Post: sprayjet
  Plasma spray or HVOF ? Julio VALLES 11 26,698 10-07-2011, 06:21 AM
Last Post: Gordon
  Select a twin arc spray system Florin 27 38,546 02-20-2010, 03:42 PM
Last Post: Florin
  T400 plasma spray Bostick123 3 8,502 02-05-2009, 12:32 PM
Last Post: Gordon



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd