Metco 7MT-2 Ext Gun
10-14-2008, 06:47 AM,
#1
Shocked  Metco 7MT-2 Ext Gun
Dear All:

I wish to know the diameter of 7MT-2 Gun (Body and Front End). There is an application of such gun for OD spray, but with small confine area (50mm) due to some obstruction. Wish to know if this extension gun is able to perform the job. Powder use will be AMDRY 956.

Thank You very much

Ykang
Reply
10-15-2008, 06:25 PM,
#2
RE: Metco 7MT-2 Ext Gun
Hi Ykang

I think the 7MT-2 was claimed to go down to 2" (~50mm) diameter.

Metco technical bulletin also states "Type 7MT-2' - This extension is 2 feet long. It will extend about 18" into bores where diameters range between 2-1/4" and 3-3/4" and 2 feet into bores larger than 4-1/4" in diameter"

Hope that helps.
Reply
10-16-2008, 08:19 AM,
#3
RE: Metco 7MT-2 Ext Gun
Hi Gordon:

Thanks for that. Actually I have received technical bulletin from SM, and it states all the possibility. But just wish to know the ext gun body and front gun size (diameter) for illustrating to my customer. These are not provided in bulletin.

Hope somebody can help to provide it.

Thank You
Reply




Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd