Metco 11E operator and service manual
08-21-2013, 06:44 PM,
#1
Metco 11E operator and service manual
Hi,
I just got a metco 11E but no manual with it, is there anyone who has an operative and service manual to share/sell?
Is the 10E or 12E ones ok also for the 11E?
Thanks a lot for helping

I have another question but this might need a different thread: can i spray high melting point wires with the 11E? What is necessary to modify? I understood that the main issue is the wire feed speed ( faster for aluminum/zinc while should be slower for higher melting point wires), am i correct?
Is there a modification kit or something like that?
Again, thanks!
Reply
08-21-2013, 08:40 PM,
#2
RE: Metco 11E operator and service manual
(08-21-2013, 06:44 PM)MVagusta Wrote: Hi,
I just got a metco 11E but no manual with it, is there anyone who has an operative and service manual to share/sell?
Is the 10E or 12E ones ok also for the 11E?
Thanks a lot for helping

I have another question but this might need a different thread: can i spray high melting point wires with the 11E? What is necessary to modify? I understood that the main issue is the wire feed speed ( faster for aluminum/zinc while should be slower for higher melting point wires), am i correct?
Is there a modification kit or something like that?
Again, thanks!

I would imagine to change from a high speed to a low speed gun for higher melting points ferrous wires, you would have to change the drive gears, counter and turbine shafts, siphon plug as well as the nozzle( different number of holes at its outlet)

Should be able to get the assembly separately. Pretty simple to interchange I would thing

Regards

Shantanu
Reply
08-24-2013, 03:32 PM,
#3
RE: Metco 11E operator and service manual
(08-21-2013, 08:40 PM)shantanu Wrote:
(08-21-2013, 06:44 PM)MVagusta Wrote: Hi,
I just got a metco 11E but no manual with it, is there anyone who has an operative and service manual to share/sell?
Is the 10E or 12E ones ok also for the 11E?
Thanks a lot for helping

I have another question but this might need a different thread: can i spray high melting point wires with the 11E? What is necessary to modify? I understood that the main issue is the wire feed speed ( faster for aluminum/zinc while should be slower for higher melting point wires), am i correct?
Is there a modification kit or something like that?
Again, thanks!

I would imagine to change from a high speed to a low speed gun for higher melting points ferrous wires, you would have to change the drive gears, counter and turbine shafts, siphon plug as well as the nozzle( different number of holes at its outlet)

Should be able to get the assembly separately. Pretty simple to interchange I would thing

Regards

Shantanu
Hi,
thanks for the answer! Even though I'm not familiar with all the parts you named it's seem there are quite few components to be changed i would say Sad

Is there anyone who has an operative/maintenance manual suitable for the metco 11e to share/sell? Sign0009

thanks, have a good we!


Reply
08-28-2013, 02:44 PM,
#4
RE: Metco 11E operator and service manual
I'm sure I may have the Metco service manuals for the 11E wire gun. It maybe more than just one. I have just about every Metco service and equipment manuals. If you need others let me know I will work something out, its not the manuals its finding it, they are in boxes and in storage with other equipment.
Reply
08-29-2013, 09:10 PM,
#5
RE: Metco 11E operator and service manual
(08-28-2013, 02:44 PM)Ken59 Wrote: I'm sure I may have the Metco service manuals for the 11E wire gun. It maybe more than just one. I have just about every Metco service and equipment manuals. If you need others let me know I will work something out, its not the manuals its finding it, they are in boxes and in storage with other equipment.

Hi! Yes i'm interested in the metco 11e manual ( both operative and service ones) would you try to find it out?please let me know your selling price.

Thanks a lot
Reply
09-13-2013, 02:32 AM,
#6
RE: Metco 11E operator and service manual
I'm interested in METCO 11E Manual (including surgery and services).
Reply
04-13-2019, 05:11 PM,
#7
RE: Metco 11E operator and service manual
(08-28-2013, 02:44 PM)Ken59 Wrote: I'm sure I may have the Metco service manuals for the 11E wire gun. It maybe more than just one. I have just about every Metco service and equipment manuals. If you need others let me know I will work something out, its not the manuals its finding it, they are in boxes and in storage with other equipment.

Hi Ken

I need manual for metco 11e and 5p so if you can please send me some contact to you
. I have just bought on auction very bare guns so without any instructions is not chance to use it.
Maybe you a my Saviour.

My best regards
Roman
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  Thermal Spray Operator required SSCC 1 1,245 10-17-2018, 09:39 PM
Last Post: longman1971
  Problem solved service and calibration 2DOGSTAR 0 1,796 09-14-2016, 02:27 PM
Last Post: 2DOGSTAR
  HVOF Coating Operator Manish Choudhary 0 2,771 03-31-2016, 08:25 AM
Last Post: Manish Choudhary
  Plazjet Installation, Operation Maintenance Manual Stephen Booth 0 2,754 06-14-2013, 07:57 AM
Last Post: Stephen Booth
  DJ Manual Gun Required 2DOGSTAR 2 5,054 10-30-2010, 05:19 AM
Last Post: young31
  UK thermal spray service required TurbineRepair 1 4,344 04-06-2010, 02:16 PM
Last Post: Gordon
  coating service Do-Talent 0 3,220 03-05-2009, 04:27 AM
Last Post: Do-Talent
  Hardness testing machine - service organisation harryp 4 9,371 06-18-2008, 09:34 AM
Last Post: timequipment
  Robot manual needed TurbineRepair 0 3,214 06-13-2008, 09:19 AM
Last Post: TurbineRepair
  Metallurgical Service: Coating Condition, Quality, and Failure Analysis hwang 0 3,767 04-20-2007, 12:03 PM
Last Post: hwang



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd