Poll: What is your involvement in Surface Engineering?
You do not have permission to vote in this poll.
manufacturer or supplier of S.E equipment or materials
16.00%
36 16.00%
provider of S.E treatments
34.67%
78 34.67%
user of S.E treatments
22.22%
50 22.22%
student
11.11%
25 11.11%
academic or consultant with interests in S.E
7.56%
17 7.56%
end user or other category not listed
8.44%
19 8.44%
Total 225 vote(s) 100%
* You voted for this item. [Show Results]

Member Survey
01-12-2009, 10:44 AM,
#41
RE: Member Survey - Introduce yourself here
Good day everyone.

I'm a fresh graduate that has recently landed a job as a chemist in charge of formulating coatings for metal and plastics (solvent-borne and water-borne). I'm working in Multi Square Sdn. Bhd. in Malaysia (http://www.multisquare.com) which happens to be a paint manufacturing company.

It is interesting to see forums like these around. There really is too few of them. Thanks to forum like these, we can exchange knowledge and information to better equip ourselves. Thanks to Gordan, I've really gain a lot of knowledge.

Hope to be receiving guidance with everyone here and also exchanging information and knowledge.
Reply
01-12-2009, 05:22 PM,
#42
RE: Member Survey - Introduce yourself here
Hi LeeWL

Sign0016 to the Surface Engineering Forum.
Reply
03-14-2009, 01:20 PM,
#43
RE: Member Survey - Introduce yourself here
Hi there,
I am Ken, machinist and maintenance engineer in the UK. Just stumbled across the forum whilst researching metal spray for parts reclamation.
Look forward to learning from you all.

Cheers,

Ken
Reply
03-14-2009, 05:07 PM,
#44
RE: Member Survey - Introduce yourself here
Hi Ken

Sign0016 to the Surface Engineering Forum.
Reply
03-14-2009, 09:49 PM,
#45
RE: Member Survey - Introduce yourself here
Hi everyone,
I am a newbie in thermal spray technology..
I am from Greece and i let you know something about me:
I work in pyrogenesis
I use mostly 14E Flame Spray Gun with liquid precursor for my doctorate thesis but for my job i use also HVOF,Plasma Spray and Wire Arc with powder/wire feedstock.
Thank you..
Reply
03-16-2009, 12:24 PM,
#46
RE: Member Survey - Introduce yourself here
Hi aioa

Sign0016 to the Surface Engineering Forum.
Reply
03-24-2009, 10:18 PM,
#47
RE: Member Survey - Introduce yourself here
Hi, I'm Steve and my main occupation is metallography.
I have a keen interest in coatings - plasma, aluminides etc.
This has to be the best forum available offering invaluable help.
Thanks Gordon for your commitment.
Reply
03-25-2009, 05:44 PM,
#48
RE: Member Survey - Introduce yourself here
Hi Steve

Sign0016 to the Surface Engineering Forum.
Reply
04-02-2009, 06:13 PM,
#49
RE: Member Survey - Introduce yourself here
Good Evening Everybody,

I am Nirav from INDIA.
I have done my M.S. in Chemical Engineering from USA.
I am having my own jobshop for Thermal Spary in Ahmedabad where we are doing reclamation of worn out parts.
This foram is very very helpful and interesting.
We are setting up another big jobshop in Ahmedabad,INDIA.
Reply
04-03-2009, 09:58 AM,
#50
RE: Member Survey - Introduce yourself here
Hi I am Ravi working as application engineer for MEC in India.www.mecpl.com.I am Responsible for generating business for TS from Southern part of India.
Reply
05-12-2009, 06:58 PM,
#51
RE: Member Survey - Introduce yourself here
Hello, my name is Dan Crawford and I am the owner of Control Vision Inc.

We have developed a new imaging and diagnostic system, SprayCam, specifically targeted for the Thermal Spray Industry. SprayCam is designed to be a low cost, low maintenance, easy to use and robust system for viewing and measuring particle injection distributions for Thermal Spray Processes, ensuring Reliable and Consistent Coatings. SprayCam is also a valuable tool for troubleshooting torch problems, especially in radially injected torches.

Visit our YouTube Channel for sample video.
Reply
05-13-2009, 02:50 AM,
#52
RE: Member Survey - Introduce yourself here
Hi Dan

Sign0016 to the Surface Engineering Forum.

(05-12-2009, 06:58 PM)Control Vision Inc Wrote: Hello, my name is Dan Crawford and I am the owner of Control Vision Inc.

We have developed a new imaging and diagnostic system, SprayCam, specifically targeted for the Thermal Spray Industry. SprayCam is designed to be a low cost, low maintenance, easy to use and robust system for viewing and measuring particle injection distributions for Thermal Spray Processes, ensuring Reliable and Consistent Coatings. SprayCam is also a valuable tool for troubleshooting torch problems, especially in radially injected torches.

Visit our YouTube Channel for sample video.
Reply
05-21-2009, 01:22 PM,
#53
RE: Member Survey - Introduce yourself here
Hi, I'm Martyn Proctor of Thermal-spray Materials & Services Ltd. I have a warehouse full of thermal spray wires, some powders & mainly 10E Spares.

Any equiries to thermalsprayuk@aol.com
Reply
06-09-2009, 04:06 AM,
#54
RE: Member Survey - Introduce yourself here
Hello All

I have been involved with thermal spray since the early 80's, and there is always something new to learn.

Phil
Cool
Reply
06-11-2009, 04:18 PM,
#55
RE: Member Survey - Introduce yourself here
Hi Phil and Martyn

Sign0016 to the Surface Engineering Forum.

Quote:there is always something new to learn

Yes, I'm just worried I'm forgetting more stuff than I learning Happy0193
Reply
06-15-2009, 08:13 PM,
#56
RE: Member Survey - Introduce yourself here
hi everyone, im Tom, im 15 from engand and have been building & designing things since i could draw
im currently building a Small Flying aircraft, well its sort of half aircraft half hovercraft. but i was wondering what sort of motor should use for the thrusters, any ideas welcome thanks
Reply
06-17-2009, 12:16 PM,
#57
RE: Member Survey - Introduce yourself here
Hi,

I am an engineer working in Thermal Spray process in an Aircraft Engine company for 10 years, dealing with problems in APS and HVOF. Good to see people having typical headaches like i have and solutions here.

Thanks,
Reply
06-22-2009, 06:37 PM,
#58
RE: Member Survey - Introduce yourself here
Hi TomCarlisle and AYKAC

Sign0016 to the Surface Engineering Forum.
Reply
07-10-2009, 10:51 AM,
#59
RE: Member Survey - Introduce yourself here
Hello,
I'm working in aircraft engine repair business.
We do repair Auxillary Power Units (Aircraft starters)
TS takes a huge place in APU repair as well as in our component repair process.
Always looking for good advice, though experience is there.
Thanks Laurent
Reply
07-20-2009, 09:05 AM,
#60
RE: Member Survey
Hello All

An end user and new to exotic material surface coating! Ashamed0002
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  New Member ewcommunity 0 1,750 07-22-2019, 08:08 AM
Last Post: ewcommunity
  New member steve_d 0 2,126 11-05-2017, 10:08 AM
Last Post: steve_d
  New Member Jord-E 0 2,480 03-17-2017, 08:40 PM
Last Post: Jord-E
  New Forum-Member based near Berlin Christian_B 1 3,094 02-23-2017, 05:55 AM
Last Post: plasmajet1990
  Hello! From A New Member Wascator 4 5,801 09-15-2014, 09:28 AM
Last Post: Laurent
  A New Member Introduce Here Agili Ron 0 2,862 10-17-2012, 11:11 AM
Last Post: Agili Ron



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd