METCO 601
10-06-2011, 08:22 PM,
#1
METCO 601
Hi sir :
Would you please provide me with the spraying table of Metco 601 using 11M gun
Reply
10-10-2011, 05:40 PM,
#2
RE: METCO 601
Hi M.Naguib

It would be best to contact Sulzer metco.

From my old technical bulletin on Metco 601NS parameters for 11MB

Nozzle 11MB 112
Air cooled cover 30 psi (spraying IDs <100mm 50 psi)
Primary plamsa gas argon 50 flow @ 75 psi
Power 300A, 25 - 35V
Spray rate 6 lb/hr
Carrier gas flow 50 (3MP/4MP)
Spray distance 2"

A few variations

500A with 1" spray distance rest the same as above

8lb/hr spray rate, rest the same as above
Reply
10-15-2011, 09:57 PM,
#3
RE: METCO 601
Thanks gordon
Reply




Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd