Jet Kote O2 and H2 supply pressure requirements?
06-24-2009, 06:06 PM,
#1
Jet Kote O2 and H2 supply pressure requirements?
What gas supply flows and pressure requirements are you using for the Jet Kote.

Someone was telling me O2 was 0-25 bar!!! and 3200scfh!!! and a 3/4" pipe.

They also had the H2 supply of 0-18 bar and 3200scfh (1500nlpm).

That sounds high to me. Most I have ever seen them run is 2100scfh.


anyway... can someone with JK experience enlighten me Smile

Thanks
Reply
06-26-2009, 03:32 PM,
#2
RE: Jet Kote O2 and H2 supply pressure requirements?
ok hmmm so I need 10 bar supply of H2 and 17 bar supply of the O2. Smile
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  Pressure Regulators? Edson 4 4,406 11-04-2022, 02:07 PM
Last Post: SakshiVerma
  Hopper Pressure Lower than Gun Pressure devinrist 4 6,905 01-03-2016, 05:45 AM
Last Post: Johnny_Blaze
  Jet kote gun leakage problem Hector Monjardin 0 2,900 11-18-2015, 04:24 PM
Last Post: Hector Monjardin
  JP 5000 Type System Chiller Power Supply Edson 4 6,061 11-13-2014, 07:45 AM
Last Post: Parat Tech
  Stellite Jet Kote - Green flame? farmcop1 4 6,691 05-29-2012, 07:25 PM
Last Post: farmcop1
  safety requirements Arturas 3 4,741 05-14-2012, 02:49 PM
Last Post: alonzomerrill
  Arc spraying: air quality requirements Stefan 2 4,537 11-24-2011, 10:19 AM
Last Post: Stefan
  Jet kote III orthogonal spray parameters query wangqun72 6 9,236 09-05-2010, 05:57 AM
Last Post: k09
  The ratio of oxygen to fuel of Jet kote III wangqun72 5 9,654 09-02-2010, 06:18 PM
Last Post: wangqun72
  Jet Kote nozzle life plyer 8 13,457 05-15-2009, 02:30 PM
Last Post: plyer
  Jet Kote water inlet temp... Intel55 4 7,844 03-19-2009, 10:53 PM
Last Post: Gordon
  Calculating powder requirements Intel55 5 7,666 12-01-2008, 02:56 PM
Last Post: Intel55



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd