Threaded Mode | Linear Mode

Intel55 · 06-24-2009, 06:06 PM

What gas supply flows and pressure requirements are you using for the Jet Kote.

Someone was telling me O2 was 0-25 bar!!! and 3200scfh!!! and a 3/4" pipe.

They also had the H2 supply of 0-18 bar and 3200scfh (1500nlpm).

That sounds high to me. Most I have ever seen them run is 2100scfh.

anyway... can someone with JK experience enlighten me Smile

Thanks

Intel55 · 06-26-2009, 03:32 PM

ok hmmm so I need 10 bar supply of H2 and 17 bar supply of the O2. Smile

Possibly Related Threads...
Thread:		Author	Replies:	Views:	Last Post
	safety requirements	Arturas	3	827	05-14-2012 02:49 PM Last Post: alonzomerrill
	High Pressure Piston Rods HVOF coatings	HVoilF	14	7,639	12-24-2011 10:20 AM Last Post: k09
	Arc spraying: air quality requirements	Stefan	2	696	11-24-2011 10:19 AM Last Post: Stefan
	85/15 Zn/Al pressure vessel coating	spencew	5	1,393	04-01-2011 06:28 PM Last Post: MichiganMan
	GTV GLC HVOF TopGun acetylene pressure and flows	Metallurgy_eng	2	1,884	01-17-2011 06:11 PM Last Post: Gordon
	Peel of coating during pressure testing	raviswanadha	6	1,620	01-14-2011 08:49 PM Last Post: Gordon
	Jet kote III orthogonal spray parameters query	wangqun72	6	1,717	09-05-2010 05:57 AM Last Post: k09
	The ratio of oxygen to fuel of Jet kote III	wangqun72	5	2,235	09-02-2010 06:18 PM Last Post: wangqun72
	Jet Kote nozzle life	plyer	8	3,099	05-15-2009 02:30 PM Last Post: plyer
	Jet Kote water inlet temp...	Intel55	4	2,149	03-19-2009 10:53 PM Last Post: Gordon
	Calculating powder requirements	Intel55	5	2,253	12-01-2008 02:56 PM Last Post: Intel55
	What's maximum pressure loading for WC10Co4Cr?	deepskysea	2	2,076	09-04-2008 10:32 AM Last Post: deepskysea
	Hydrogen Flow and Pressure for JetKote gun	jeffsays163	1	1,904	04-21-2008 03:38 PM Last Post: Gordon