JP8000 vs DJ2600 system
04-09-2015, 02:08 AM,
#1
JP8000 vs DJ2600 system
Hi, dear all:

We intend to buy a new thermal spraying system. Could you anyone tell me which one is a better (JP8000 and DJ2600) HVOF system ? i.e., stucture, bonding strength for metallic coatings.

Thanks

regards
cheng
Reply
04-09-2015, 07:41 PM,
#2
RE: JP8000 vs DJ2600 system
Is there any reason you would not consider an HVAF system? It will give you the same or better coating quality with a much lower operating cost. HVAF guns are air cooled, so there is no chilled water system to maintain. Additionally, HVAF gun parts last more than 10 times longer than HVOF gun parts.

Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  NiCrBSi coating by DJ2600 Zhao Yun 6 1,278 12-05-2022, 03:43 AM
Last Post: Zhao Yun
  Spark Issue on DJ2600 HVOF Flame xxxxmgulkokan 3 2,111 08-31-2022, 03:15 PM
Last Post: Red Baron
  Corrosion Problem on HVOF Coating (DJ2600 Metco Gun) xxxxmgulkokan 5 2,368 04-03-2022, 12:45 PM
Last Post: sprayjet
  Corrosion or Contamination on JP8000 xxxxmgulkokan 2 1,173 03-26-2022, 06:33 AM
Last Post: RAY SENFENG
  Parameter Stellite 6 HVOF DJ2600 achmadarifudinh 0 2,625 12-07-2018, 01:36 AM
Last Post: achmadarifudinh
  HVOF DJ2600 DJ8W powder feeder issue vetrinit 5 8,399 06-17-2015, 04:39 PM
Last Post: loriolo
  DJ2600 Injector life pakalano 22 23,553 10-19-2012, 03:39 PM
Last Post: pakalano
  Diificulty in getting <1% porosity on a DJ2600 hybrid Intel55 3 7,018 11-21-2007, 05:59 PM
Last Post: Gordon



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd