I need advise on control of metco 405 bond coat
10-19-2011, 03:24 PM,
#1
I need advise on control of metco 405 bond coat
Dear all,

I need some advise on how to put some process control on the spraying of Metco 405 wire bond coat.

Thanks
Amoros
Reply
10-19-2011, 09:15 PM,
#2
RE: I need advise on control of metco 405 bond coat
You will find some basic testing in the Aerospace engine manuals, particularly RR. Normal testing is hardness, metallurgical and tensile bond. Are you auto manipulating the gun by robot, traverse/scanner, etc?
Len Wood
METAL MONSTER LTD
BIGGER BETTER FASTER MORE!
Ph: +64 9 4730705
Fax: +64 9 4730706
Email:: len@metal-monster.com
www.metal-monster.com
Reply
10-20-2011, 09:22 AM, (This post was last modified: 10-20-2011, 09:23 AM by Amoros.)
#3
RE: I need advise on control of metco 405 bond coat
Len,

No, the gun was hand held
Is there any method we can automate the hand held gun?
Reply
10-20-2011, 04:43 PM,
#4
RE: I need advise on control of metco 405 bond coat
Hi Amoros

Sign0016 to the Surface Engineering Forum.

With manual hand spraying most of the process control is reliant on the operator. So it is important to have a well trained, skilled and conscientious operator. Monitoring results via thickness checks, metallography. bond strength tests etc.

You could automate the handling of the gun by using a lathe, traverse unit or robot etc. More advance spray equipment may allow you to automate/monitor gun parameters making process control a little less operator reliant.
Reply
12-01-2011, 02:08 PM,
#5
RE: I need advise on control of metco 405 bond coat
I am using a a Metco 14E-P wire gun, propane fuel. 405 primer.Substrate is 420 stainless motor shafts about 2" in diam. Can anyone here troubleshoot this problem for me?
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  Recomended bond coat for Metco 81 VFNS top coat achmadarifudinh 9 4,717 07-06-2023, 04:54 PM
Last Post: ServiceTech
  Metallic HVOF bond coat to TBC APS top coat Gas turbines achmadarifudinh 0 1,839 07-08-2019, 08:34 AM
Last Post: achmadarifudinh
  Bond coat for Metco 312NS Bharti Malvi 4 5,057 12-21-2016, 08:51 AM
Last Post: Bharti Malvi
  How do I do Bond Coat Selection? RV_DMG 2 4,686 03-13-2015, 11:44 PM
Last Post: loriolo
  Delamination in the bond coat sprayed on a Ti specimen Justin 9 10,209 01-06-2014, 10:00 PM
Last Post: KevinS
  Oxide anomalies in bond coat JBross 5 7,509 11-28-2011, 06:16 PM
Last Post: JBross
Shocked Cracks! in bond coat Christine 5 8,308 11-28-2011, 11:26 AM
Last Post: landemarre
  Possibility Study to use Stellite - 306 Bond Coat for 75Cr3C2 -25NiCr Top Coat -Reg sreenuvundela 2 5,940 09-14-2011, 05:36 AM
Last Post: sreenuvundela
Lightning Plasma power control?!?! *Plasma Junkie* 2 5,083 10-22-2010, 03:47 PM
Last Post: *Plasma Junkie*
  F50TF50 bond coat Harvey 6 9,801 07-10-2009, 07:01 PM
Last Post: derek
  Metal spray equipment. Please could someone advise? Ken 5 12,861 03-17-2009, 04:56 PM
Last Post: djewell
Sad Dark grey particles in Ni-Al bond coat? fhyuan 9 12,286 01-18-2009, 07:02 PM
Last Post: Gordon
  How to control roughness of coatings Zhangqiuping 5 7,898 09-05-2008, 10:42 AM
Last Post: Zhangqiuping
  oxide stringers in the bond coat fhyuan 5 11,255 03-18-2008, 04:40 PM
Last Post: Jerrythespritzer
  Bond coat raviswanadha 2 6,712 11-20-2007, 07:18 AM
Last Post: drramc



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd