How to spray combustion chamber liner
08-21-2014, 05:33 PM,
#1
How to spray combustion chamber liner
Dear People,

Could anyone help to direct what is the better equipment solution for spraying combustion chamber liner (ID). Especially the bond coat for the total TBC. I know that for spray TBC on blade we can use VPS or HVOF (the bond coat), but to spray ID of combustion chamber or transition piece, what equipment is better? Can HVOF have the proper ID gun? Or we have to use ID torch of APS? Thanks.

Michaellearnstocoat
Reply
08-22-2014, 06:34 AM,
#2
RE: How to spray combustion chamber liner
(08-21-2014, 05:33 PM)Michaellearnstocoat Wrote: Dear People,

Could anyone help to direct what is the better equipment solution for spraying combustion chamber liner (ID). Especially the bond coat for the total TBC. I know that for spray TBC on blade we can use VPS or HVOF (the bond coat), but to spray ID of combustion chamber or transition piece, what equipment is better? Can HVOF have the proper ID gun? Or we have to use ID torch of APS? Thanks.

Michaellearnstocoat



Dear,

You can use ID APS gun for spraying ID area. There is one model available for internal plasma coatings. Using HVOF i dont think it will work for applying TBC coating.


Thanks
Reply
08-22-2014, 01:53 PM, (This post was last modified: 08-22-2014, 02:01 PM by Michaellearnstocoat.)
#3
RE: How to spray combustion chamber liner
(08-22-2014, 06:34 AM)Hari Wrote:
(08-21-2014, 05:33 PM)Michaellearnstocoat Wrote: Dear People,

Could anyone help to direct what is the better equipment solution for spraying combustion chamber liner (ID). Especially the bond coat for the total TBC. I know that for spray TBC on blade we can use VPS or HVOF (the bond coat), but to spray ID of combustion chamber or transition piece, what equipment is better? Can HVOF have the proper ID gun? Or we have to use ID torch of APS? Thanks.

Michaellearnstocoat



Dear,

You can use ID APS gun for spraying ID area. There is one model available for internal plasma coatings. Using HVOF i dont think it will work for applying TBC coating.


Thanks


Thank you Hari,

I heard someone using HVOF spraying bondcoat of TBC which can be better than APS sprayed bondcoat. So I thought if HVOF is also used on spraying bond coat of combustion chamber if they are large enough like 550mm in diameter, maybe DJ's extention gun can handle the ID spraying of MCrAlY bond? Anyone tried? Or APS spray the MCrAlY bond of combustion chamber is the fixed and recognized OEM method? Thanks.
Reply
08-22-2014, 05:38 PM,
#4
RE: How to spray combustion chamber liner
(08-22-2014, 01:53 PM)Michaellearnstocoat Wrote:
(08-22-2014, 06:34 AM)Hari Wrote:
(08-21-2014, 05:33 PM)Michaellearnstocoat Wrote: Dear People,

Could anyone help to direct what is the better equipment solution for spraying combustion chamber liner (ID). Especially the bond coat for the total TBC. I know that for spray TBC on blade we can use VPS or HVOF (the bond coat), but to spray ID of combustion chamber or transition piece, what equipment is better? Can HVOF have the proper ID gun? Or we have to use ID torch of APS? Thanks.

Michaellearnstocoat



Dear,

You can use ID APS gun for spraying ID area. There is one model available for internal plasma coatings. Using HVOF i dont think it will work for applying TBC coating.


Thanks


Thank you Hari,

I heard someone using HVOF spraying bondcoat of TBC which can be better than APS sprayed bondcoat. So I thought if HVOF is also used on spraying bond coat of combustion chamber if they are large enough like 550mm in diameter, maybe DJ's extention gun can handle the ID spraying of MCrAlY bond? Anyone tried? Or APS spray the MCrAlY bond of combustion chamber is the fixed and recognized OEM method? Thanks.


Dear, HVOF sprayed coating is always less porous coating which I personally never suggest for bond coat purpose. after bond coat surface should be little rough so as to give proper adherence to the top coat.

Have a nice day!


Reply
09-05-2014, 12:29 AM,
#5
RE: How to spray combustion chamber liner
(08-21-2014, 05:33 PM)Michaellearnstocoat Wrote: Dear People,

Could anyone help to direct what is the better equipment solution for spraying combustion chamber liner (ID). Especially the bond coat for the total TBC. I know that for spray TBC on blade we can use VPS or HVOF (the bond coat), but to spray ID of combustion chamber or transition piece, what equipment is better? Can HVOF have the proper ID gun? Or we have to use ID torch of APS? Thanks.

Michaellearnstocoat
hello
you can use APS and use GUN 3Mb use also powder for bond amdry 962 ShyShyShyShyShyShyShyShyShyShyShyShyShyShy
Reply
09-06-2014, 09:24 AM,
#6
RE: How to spray combustion chamber liner
The most standard quality solution for TBC coating equipment is using APS process for the bond coat and for the Top Coat. That way you have only one set up, and one process to control. Using all the other processes are great, but not really a good place to start.

Stick with plasma you will be fine.

Normally you would use a 80KW power supply , with powder feeder, and the torch could be a 3MBT or F1 torch depending on your configuration.

Many companies including my make this equipment, integrating to Robots, spray booth, etc as well.
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  Green flame in HVOF hydrogen - oxygen combustion JeroenB 3 2,143 05-07-2021, 01:24 PM
Last Post: JeroenB
  Want consumables for Metco 16E combustion wire system. Turbo Machinery 0 1,908 06-07-2019, 12:11 PM
Last Post: Turbo Machinery
  coating Fluidized Bed Combustion Boiler tubes iwan-sedaryawan 9 10,159 09-18-2017, 05:01 AM
Last Post: Stephen Booth
  Parameters of Combustion wire gun Turbo Machinery 3 6,027 05-25-2014, 06:07 AM
Last Post: Stephen Booth
  Reduce unmelted particles in Combustion Wire Spray Alberto Villalobos 8 8,371 05-19-2014, 07:21 PM
Last Post: KevinS
  JP5000 combustion tube KevGarty 5 7,181 11-01-2013, 09:19 PM
Last Post: kschewe
  Cold Spraying & Cold spray combustion PPSABoyce 2 5,204 03-12-2012, 02:17 PM
Last Post: loriolo
  HVOF Powder for Block Engine and Cylinder Liner minh_8888 1 4,363 06-21-2011, 02:28 PM
Last Post: Met.Eng.
  2500 HP Diesel Engine piston liner Met.Eng. 5 7,289 05-24-2011, 02:51 AM
Last Post: Gordon
  Which powder should I use with my combustion flame spray gun? jamaicanarchie 3 5,973 06-06-2009, 06:05 PM
Last Post: Gordon
  Bonding for Combustion/Flame Wire Spraying iwan-sedaryawan 3 7,447 02-10-2009, 04:59 PM
Last Post: iwan-sedaryawan
  Marine Diesel Engine Liner mcg_pinsbushing 12 15,917 05-16-2008, 05:00 PM
Last Post: Gordon
  Chrome Carbide - Nickel Chrome or 95MXC in wire form for a Cylinder Liner? mcg_pinsbushing 0 7,611 05-07-2008, 10:00 AM
Last Post: mcg_pinsbushing
  smells from pvd chamber sparky 2 5,120 03-22-2007, 12:26 AM
Last Post: bhellman



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd