How to removal 45VFNS coating?
07-04-2018, 03:01 PM,
#1
How to removal 45VFNS coating?
Hello everyone
how to removal 45VFNS coating after spraying, because some parts didn't fulfill the requirement of customer and should be re-coated again. We've tried blasting only to found out deflection of parts. The part substrate is Ni-based alloy with thickness of 0.5-0.8 mm and coating area is less than 9X15 mm. Is there any chemical method to removal this coating?
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  Coating removal by waterjet stripping ArjunAnnam 1 332 11-30-2023, 09:38 AM
Last Post: Zhao Yun
  Coatings Removal by High Pressure Water Taz 1 825 01-16-2023, 07:03 AM
Last Post: Zhao Yun
  removal or stripping of coatings mountprat 18 36,979 10-26-2022, 04:52 PM
Last Post: bshur24
  Tungsten Carbide HVOF Removal PrecisionCarbide 9 14,104 02-24-2020, 11:17 AM
Last Post: Packiaraj Mutharasu
  45VFNS Delamination Meeker77 2 4,161 05-24-2015, 05:46 PM
Last Post: Meeker77
  Methods for removal of W-, Ni- and V-coating kahrax 15 22,431 01-28-2015, 07:53 PM
Last Post: PrecisionCarbide
  45VFNS Laurent 4 6,155 06-03-2013, 08:57 AM
Last Post: Laurent
  Removal of Galvenised coating Vijay Deshpande 1 4,348 01-26-2009, 05:02 PM
Last Post: Gordon
  HVOF T800 removal finnie 2 10,891 12-16-2008, 01:08 PM
Last Post: kurtecard
  REMOVAL PF TSA COATING Vijay Deshpande 2 9,120 01-03-2008, 04:49 PM
Last Post: Vijay Deshpande
Question 88WC - 8Co - 4Cr Removal Advice Batsy 2 7,581 02-05-2007, 09:21 AM
Last Post: Batsy



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd