Help finding out METCO 11E check valves/hose connectors
10-22-2013, 07:53 PM,
#1
Help finding out METCO 11E check valves/hose connectors
Hi,
as i already wrote within a previos thread i got a METCO 11E and i've trouble finding the connectors/check valve as they have a strange dimension (1/8" left hand thread for fuel and 1/8" right hand thread for oxygen).

How can i solve it?

Are there nipple/adapter/check valves available? Italian standard is 3/8".
Or is it available a 1/8" connection where i can attach the gas hoses directly? (as per air connection pictured here below).

Thanks to all!
regards
[Image: 23tqk2p.jpg]
Reply
10-22-2013, 11:54 PM,
#2
RE: Help finding out METCO 11E check valves/hose connectors
The threads on the gun are as follows

3/8" UNF - LH
3/8" UNF - RH
1/2" UNF - RH

LH = Left Hand
RH = Right Hand

Should be available from most welding outlets
Reply
10-23-2013, 08:03 AM,
#3
RE: Help finding out METCO 11E check valves/hose connectors
Dear,

If you are looking for spare parts for any of the thermal spray gun or a new gun, please feel free to send your inquiry.

Thanks

Jaydev Choudhary
+91-9351378625
bdm@mecpl.com
www.mecpl.com
Reply
10-24-2013, 07:16 PM,
#4
RE: Help finding out METCO 11E check valves/hose connectors
(10-22-2013, 11:54 PM)KevGarty Wrote: The threads on the gun are as follows

3/8" UNF - LH
3/8" UNF - RH
1/2" UNF - RH

LH = Left Hand
RH = Right Hand

Should be available from most welding outlets

Hi! Thanks for helping!
I thought they were GAS threads.... while they actually are UNF... i checked the diameter and now all makes sense.

Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  Hose end Assy with copper tube Joe M 5 3,112 04-13-2021, 10:02 AM
Last Post: Stephen Booth
  HVOF COATING ON GATE VALVES & BALL VALVES Manish Choudhary 1 4,005 12-16-2014, 02:00 PM
Last Post: Manish Choudhary



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd