Surface Engineering Forum

  • Alternative Forum Home PageSEF Portal
  • Old S E Message Board ArchivesOld Message Board Archives
  • Search Old Surface Engineering Message Board ArchivesSearch Archives
  • Search
  • Member List
  • Calendar
  • Help
Current time: 09-26-2016, 10:01 AM Hello There, Guest! (Login — Register)

Surface Engineering Forum / Surface Engineering / Surface Engineering Threads v
« Previous 1 ... 24 25 26 27 28 Next »
/ Heat Treatment of Abradable Coatings




Post Reply 
Threaded Mode | Linear Mode
Heat Treatment of Abradable Coatings
09-04-2007, 10:44 AM
Post: #1
wasif Offline
Active Member
****
 Posts: 14
Joined: Aug 2007
Reputation: 2
Heat Treatment of Abradable Coatings
Cheers

Hi All

can anybody propvide me some information on the heat treatment of abradable coatings after applying bond coat and top coat.heat treatment after applying bond coat might be to increase adhesion with the substrate and after applying top coat might be to increase density of coatin/generating porosity or for some other purposes(please mention if some body have relavent inmformation).


wasif
Send this user an email Find all posts by this user
Quote this message in a reply
09-04-2007, 03:59 PM
Post: #2
Gordon Offline
Administrator
 Posts: 1,783
Joined: Jun 2006
Reputation: 9
RE: Heat Treatment of Abradable Coatings
Hi Wasif

The only thermal spray abradable coating heat treatment I can think of, is the burning out of the polyester constiuent in some of these coatings.
Regards Gordon

www.gordonengland.co.uk
www.surfaceengineer.co.uk
Photography Obsession
Send this user an email Visit this user's website Find all posts by this user
Quote this message in a reply
« Next Oldest | Next Newest »
Post Reply 




Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  removal or stripping of coatings mountprat 16 16,416 06-24-2016
06:54 AM
Last Post: James Chua
  Metco 308NS Abradable KevGarty 4 767 05-17-2016
11:20 PM
Last Post: KevGarty
  Reg: Anti stick coatings for moulds and dies. Dileep 4 816 01-04-2016
03:26 PM
Last Post: djewell
  Tungsten Carbide coatings Sealants sorousheti 5 1,123 11-23-2015
10:18 AM
Last Post: sorousheti
  How to determine the porosity level of Metco 320NS abradable coating? viewwer 6 1,408 11-23-2015
09:57 AM
Last Post: Joris Kraak
  Thermal spray coatings over carbon fiber substrate Hector Monjardin 5 868 11-18-2015
04:00 PM
Last Post: Hector Monjardin
  abradable coating failure stvon 11 1,475 11-17-2015
12:33 PM
Last Post: Joris Kraak
  About service temperatures of two different Ni-Al coatings fhyuan 1 482 09-02-2015
09:38 AM
Last Post: Vadim Verlotski
  Abradable Coating Thickness limitation wasif 1 584 07-28-2015
10:57 PM
Last Post: Johnny_Blaze
  Heat treatment after HVOF process to decrease porosity Giroud 3 1,382 07-13-2015
05:51 AM
Last Post: aerotherm
  Cold Spray Coatings on Titanium balance 4 4,242 04-24-2015
12:59 AM
Last Post: Fermit
  Masking tape for high-heat ceramic coating. texnicar 1 768 04-21-2015
04:09 PM
Last Post: cris1904
  HVOF coatings on inside diameters down to 8 cm [split] SteelDryver 11 8,552 01-14-2015
06:53 AM
Last Post: jack.son
  Diamond containing wear-resist HVOF coatings Boris Eizner 0 863 12-23-2014
08:47 AM
Last Post: Boris Eizner
  Electroplating Vs thermal spray coatings shantanu 1 1,741 04-10-2014
07:16 AM
Last Post: sreenuvundela

  • View a Printable Version
  • Send this Thread to a Friend
  • Subscribe to this thread


User(s) browsing this thread: 1 Guest(s)





Google
Custom Search


Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd

    Subscribe in a reader

    Contact Us | Thermal Spray Coatings | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication
Powered By MyBB, © 2002-2016 MyBB Group.


© Copyright Gordon England