Threaded Mode | Linear Mode

RVRTRSH · 10-15-2009, 08:53 PM

Does any body know where to get this epoxy for Bond Strength Test?

***Gordon*** · 10-16-2009, 01:02 AM

Hi RVRTRSH

Sign0016

to the Surface Engineering Forum.

I think FM 1000 adhesive film is made by Cytec Industries Inc, USA. Web site: http://www.cytec.com/

Hope that helps Smile

RVRTRSH · (This post was last modified: 10-16-2009 03:26 PM by RVRTRSH.)

(10-16-2009 01:02 AM)Gordon Wrote: Hi RVRTRSH

to the Surface Engineering Forum.

I think FM 1000 adhesive film is made by Cytec Industries Inc, USA. Web site: http://www.cytec.com/

Hope that helps

Thanks Gordon, I found Cytec Industries but they are asking for a weight or nominal thickness and I am not sure what that would be. In the spec they do not require a thickness, so she is quoting us on the .010" thickness. I am new to HVOF coating so I am glad that I found this web site. I am sure you will get many more questions from me in the future. Thanks again.

***Gordon*** · 10-17-2009, 05:35 PM

Hi RVRTRSH

Quote:In the spec they do not require a thickness, so she is quoting us on the .010" thickness.

I have not tried this product, but hear that it is good. I would assume you need to select the thickness of film that will more than fill the gap, after consideration of coating flatness and surface roughness.

Eva Kharlanova · 01-07-2010, 09:16 PM

(10-15-2009 08:53 PM)RVRTRSH Wrote: Does any body know where to get this epoxy for Bond Strength Test?

Hi RVRTRSH,
Usually, you can buy FM1000 at Couch Sales LLC (couchsalesllc.com) but now they do not have it in stock.
Or can anybody recommnd other the place that sells FM1000?
Best Regards,
Eva

RVRTRSH · 01-18-2010, 03:26 PM

Sorry it took me so long to get back to this post. I got in touch with Rob @ Couch Sales and he got me what we needed. We built a fixture and sent some samples to the lab, just waiting to hear back. Thanks for all the info.

alanmark · 03-24-2010, 08:15 AM

Thanks for sharing nice information with us. i like your post and all you share with us is uptodate and quite informative, i would like to bookmark the page so i can come here again to read you, as you have done a wonderful job.

kriskros · 06-29-2011, 06:04 PM

(03-24-2010 08:15 AM)alanmark Wrote: Thanks for sharing nice information with us. i like your post and all you share with us is uptodate and quite informative, i would like to bookmark the page so i can come here again to read you, as you have done a wonderful job.

Good Day ALL

I know that this is quite old subject, but maybe someone know company who is selling FM1000 in Europe? As probably all of form participants I need small quantities for bond strength test of HVOF coating - 70MPa min!!!

thanks 4 help