Favourite and challanging spraying applications
04-22-2019, 08:48 AM,
#1
Favourite and challanging spraying applications
Hello
Some applications are extremely tricky or has special conditions to apply. Some has special surfacing needs or special formed abrasives etc.

But some applications are applicators favourite. Reason may be easy to apply, easy or no need of grinding or any special surface needs, extreme client profit, big amount in one operation etc.

In my case when i see following jobs, my eyes smile:
Gate valves
Printing rollers
Boiler cooling pipes but in our factory
Al and Cu arc sprayed shafts


And applications that i backward;

Mud rotors and screws
Ball valves
Sharp edge finished sleeves
Teen bushings in directional drilling

Of course its about experience and equipment. I m kind of learner and my system is mecdj2700 Smile

Looking forward to hear about your experiences especially about extreme shapes and challanges.
Reply
04-26-2019, 04:07 AM,
#2
RE: Favourite and challanging spraying applications
in production, mud pump rotor grinding as attached, for ball valves ....can also build your own machine


(04-22-2019, 08:48 AM)velocity Wrote: Hello
Some applications are extremely tricky or has special conditions to apply. Some has special surfacing needs or special formed abrasives etc.

But some applications are applicators favourite. Reason may be easy to apply, easy or no need of grinding or any special surface needs, extreme client profit, big amount in one operation etc.

In my case when i see following jobs, my eyes smile:
Gate valves
Printing rollers
Boiler cooling pipes but in our factory
Al and Cu arc sprayed shafts


And applications that i backward;

Mud rotors and screws
Ball valves
Sharp edge finished sleeves
Teen bushings in directional drilling

Of course its about experience and equipment. I m kind of learner and my system is mecdj2700 Smile

Looking forward to hear about your experiences especially about extreme shapes and challanges.



Attached Files
.pdf   Mud Pump Rotor Belt Grinder Multifunction Polishing Machine.pdf (Size: 582.19 KB / Downloads: 375)
Reply
04-28-2019, 04:02 PM,
#3
RE: Favourite and challanging spraying applications
I would be highly interested in. But for mud rotors also removing of worn coating is a big deal right? Does it make sense to remove without chemicals, just with diamond belt abrasives?
Reply
04-30-2019, 10:26 AM,
#4
RE: Favourite and challanging spraying applications
Most shops seem to use chemical rather than mechanical stripping.
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  Applications of Chrome Plating ritesh 5 6,117 05-29-2013, 09:17 AM
Last Post: Laurent
  coatings WC-Co - applications in my case? pashamt8 5 6,502 05-07-2012, 02:49 PM
Last Post: saintGeorge
  Erosion-corrosion issues in boiler applications sivakumar 1 6,429 05-04-2010, 08:40 PM
Last Post: MichiganMan
  Marine Coating Applications istech 2 6,931 11-20-2008, 04:17 PM
Last Post: drramc



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd