Threaded Mode | Linear Mode

plzc126330 · 02-19-2013, 10:42 AM

Dear Everyone,

Did anybody had Sulzer F100 and F210 ID plasma gun experience, could you share the spray CoNiCrAlY bond coating parameters for me, any comments will great appreciate! Big Grin

Joe

adam wintle · 02-25-2013, 11:11 AM

(02-19-2013 10:42 AM)plzc126330 Wrote: Dear Everyone,

Did anybody had Sulzer F100 and F210 ID plasma gun experience, could you share the spray CoNiCrAlY bond coating parameters for me, any comments will great appreciate!

Joe

I have some old parameters sheets for Amdry 962 for the F210 and Amdry 995-4 for the F100. Contact me offline at adam@weartech.co.za

Possibly Related Threads...
Thread:		Author	Replies:	Views:	Last Post
	HVOF JK parameters for T800	plyer	8	7,354	07-27-2017 01:41 PM Last Post: technovel
	Arc Spray and then Plasma spray? Is this common?	cancun555	2	219	06-23-2017 07:11 AM Last Post: loriolo
	plasma booth fire suppression	CHI3	1	324	03-19-2017 06:00 AM Last Post: loriolo
	Metco 15F by Plasma F4	anne	1	847	10-06-2016 09:56 PM Last Post: loriolo
	Molibdenum sprayed by plasma	anne	3	823	10-06-2016 02:31 PM Last Post: MarkL
	Cr2O3 chromium oxide spray problems by Plasma	anne	9	1,854	08-01-2016 08:15 PM Last Post: anne
	NiAl arc spray vs NiAl plasma	CHI3	1	689	07-01-2016 05:11 PM Last Post: Vadim Verlotski
	Plasma Spray 60% Alumina- 40% Titania Roughness	Hector Monjardin	1	694	06-29-2016 10:42 PM Last Post: Hector Monjardin
	Inert gas shrouded plasma spray	MartyMc	1	834	06-23-2016 11:08 PM Last Post: loriolo
	Rotating Plasma Spray Gun	MarkL	2	1,050	06-08-2016 06:52 AM Last Post: MarkL
	Amdry 962 and Metco 204 NS parameters F1 45°	giuiori75	2	1,608	03-24-2016 04:31 PM Last Post: Max K
	Metallicity of Plasma spray	plzc126330	2	1,128	12-17-2015 10:34 AM Last Post: loriolo
	Problem solved CM1 Plasma coating for MAN	plzc126330	2	1,007	11-17-2015 12:28 PM Last Post: Joris Kraak
	Reg:Diamalloy 1005 Parameters.	Dileep	0	791	10-06-2015 05:41 AM Last Post: Dileep
	Problem for plasma powder line	keane	1	1,094	08-18-2015 06:45 AM Last Post: LEN WOOD