DJ 2700 is oxygen temperature important?
10-20-2012, 06:19 AM, (This post was last modified: 10-20-2012, 06:23 AM by Thomas.)
#1
DJ 2700 is oxygen temperature important?
Hello dear forum members,

I am a newbie in HVOF. Discovered this greatly forum recently.

We have a DJ 2700 in our lab. We use propane (not very pure, containing some high-boiling-point components) as the fuel and use a vaporizer to transform it from liquid from gas. Thus the propane temperature supplied to the gun can be 50 or higher (I guess up to 70C according to hand feeling).

My concern is that, since propane mixes with oxygen in the gun, does oxygen "quench" the hot gaseous propane back into liquid, creating propane mists? My place can be pretty cold in the winter (2 to 5 degrees C). Will this cause problem in ignition or sustaining of the supersonic flame? Actually our gun does not ignite very well now and I am guessing if this is because of the "colder" oxygen.

Does anyone have experiences on pre-warming oxygen in cold days?

Any advise is greatly appreciated.

Thomas
Reply
10-20-2012, 10:16 AM,
#2
RE: DJ 2700 is oxygen temperature important?
Hi,

You should google " Easy Heat Roof Snow De-Icing Kit " Happy0193
It's working as long as you go back to your physic classics to recalculate your flow(read Gordon post)

Regards
Reply
10-20-2012, 11:27 AM,
#3
RE: DJ 2700 is oxygen temperature important?
Hey Spraytube,

Got your joke. Actually I have one (very similar in name and function to what you described).

Actually I was trying to say was: did any HVOF users indeed see this problem before? If someone identify this as a problem, I can more readily pin-point the problem in cold days instead of blaming around (you know there are a number of other potential reasons for unsuccessful ignition).
Reply
11-01-2012, 10:16 AM,
#4
RE: DJ 2700 is oxygen temperature important?
Though there may be some unsuccessful reason behind that but you need to look for the actual default which is causing you the problem!!
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
Rolleyes Stoichiometry of Kerosene&Oxygen Calculation ! tobjung 0 1,113 09-04-2022, 05:43 PM
Last Post: tobjung
  Green flame in HVOF hydrogen - oxygen combustion JeroenB 3 2,143 05-07-2021, 01:24 PM
Last Post: JeroenB
  interpass temperature macleod-s 1 2,034 08-11-2019, 04:15 PM
Last Post: velocity
  Oxygen purity gito 0 1,745 06-17-2019, 06:03 AM
Last Post: gito
  parameter DJ GUN 2700 gito 0 2,174 03-26-2019, 03:28 AM
Last Post: gito
  HIPOJET 2700 PARAMETERS Danmarco 1 2,761 09-17-2018, 07:57 PM
Last Post: Met.Eng.
  SG-100 + ext. 2700 - spraying parameters Jaryn 1 3,298 11-27-2017, 02:21 PM
Last Post: Artyom
  5220 Gun Temperature RV_DMG 6 6,391 11-17-2015, 12:45 PM
Last Post: Joris Kraak
  DJ 2700 System Water cooled RV_DMG 3 5,735 03-14-2015, 05:05 AM
Last Post: Stephen Booth
  DJ 2700 nozzle for hydrogen RV_DMG 1 3,705 10-27-2014, 12:33 AM
Last Post: KevGarty
  Calorized and Ceramics Coating Oxygen Lance Pipe iwan-sedaryawan 0 4,479 03-04-2013, 03:42 PM
Last Post: iwan-sedaryawan
  JP5000 Oxygen KevGarty 0 3,097 09-24-2012, 07:42 AM
Last Post: KevGarty
  The ratio of oxygen to fuel of Jet kote III wangqun72 5 9,646 09-02-2010, 06:18 PM
Last Post: wangqun72
  Powder fluidity and injector clogging (DJ 2700 HVOF gun). pulaunias 7 12,796 04-19-2010, 03:16 PM
Last Post: Gordon
  Coating for Pressurized Liquid Oxygen jsheridan 6 9,330 11-21-2009, 06:35 PM
Last Post: Gordon



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd