Surface Engineering Forum

  • Alternative Forum Home PageSEF Portal
  • Old S E Message Board ArchivesOld Message Board Archives
  • Search
  • Member List
  • Calendar
  • Help

Current time: 12-10-2019, 08:08 AM Hello There, Guest! (Login — Register)


Surface Engineering Forum / Surface Engineering / Surface Engineering Threads v
« Previous 1 ... 21 22 23 24 25 ... 33 Next »
/ Conversion problem




Post Reply 
Threaded Mode | Linear Mode
Conversion problem
11-30-2009, 10:03 AM
Post: #1
landemarre Offline
Active Member
****
Posts: 32
Joined: Jul 2008
Reputation: 2
Conversion problem
Hello

I'm currently trying convert some flow plasma gas from Metco FMR to NLPM. I look in web site calculator, but I have a small problem, one of flow to translate is Nitrogen and flow is avaible for Helium secondary plasma gas flow tube! Can I use the Nitrogen primary plasma gas flow correction calculator for this translation?

Regards

Olivier
Find all posts by this user
Quote this message in a reply
11-30-2009, 01:28 PM
Post: #2
landemarre Offline
Active Member
****
Posts: 32
Joined: Jul 2008
Reputation: 2
RE: Conversion problem
(11-30-2009 10:03 AM)landemarre Wrote:  Hello

I'm currently trying convert some flow plasma gas from Metco FMR to NLPM. I look in web site calculator, but I have a small problem, one of flow to translate is Nitrogen and flow is avaible for Helium secondary plasma gas flow tube! Can I use the Nitrogen primary plasma gas flow correction calculator for this translation?

Regards

Olivier
I answer to myself.

I have seen in conversion formula, as primary gas and helium secondary gas are calibrated by nitrogen, use nitrogen converter should answer to my question.

Agree?

Olivier
Find all posts by this user
Quote this message in a reply
12-01-2009, 05:12 PM
Post: #3
Gordon Offline
Administrator
Posts: 1,792
Joined: Jun 2006
Reputation: 9
RE: Conversion problem
Hi Olivier

Yes Smile as long as the helium flow tube is calibrated the same (nitrogen at 50 psi @ 70F). If you pass nitrogen at 50 psi and 70F the helium flow meter should give a direct read-out in SCFH for nitrogen. Use Nitrogen Primary Plasma Gas Flow Calculator if using different pressures or different flow units.

Regards Gordon

www.gordonengland.co.uk
www.surfaceengineer.co.uk
Photography Obsession
Send this user an email Visit this user's website Find all posts by this user
Quote this message in a reply
12-02-2009, 10:58 AM
Post: #4
landemarre Offline
Active Member
****
Posts: 32
Joined: Jul 2008
Reputation: 2
RE: Conversion problem
Hello Gordon

Thanks a lot for your help.

Olivier

(12-01-2009 05:12 PM)Gordon Wrote:  Hi Olivier

Yes Smile as long as the helium flow tube is calibrated the same (nitrogen at 50 psi @ 70F). If you pass nitrogen at 50 psi and 70F the helium flow meter should give a direct read-out in SCFH for nitrogen. Use Nitrogen Primary Plasma Gas Flow Calculator if using different pressures or different flow units.
Find all posts by this user
Quote this message in a reply
« Next Oldest | Next Newest »
Post Reply 




Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Matrix cohesion problem of WC CoCr sams5313 2 324 09-22-2019
04:34 PM
Last Post: loriolo
  Arc spray porosity problem velocity 6 780 06-01-2019
01:19 PM
Last Post: velocity
  APS F4 gun problem sal 4 1,168 10-29-2018
08:20 PM
Last Post: Neufeld
  Matrix cohesion problem of WC CoCr bsjkiller 0 894 02-22-2018
02:08 AM
Last Post: bsjkiller
  HVOF 88 WC-12Co Cracking problem on wire drawing capstan Hector Monjardin 7 3,588 10-19-2016
11:55 PM
Last Post: Hector Monjardin
  Craking problem in Al2O3+ TiO2 plasma coating Hector Monjardin 4 2,234 09-22-2016
01:33 PM
Last Post: Hector Monjardin
  Wire drawing cracking problem Hector Monjardin 3 2,609 06-23-2016
05:37 PM
Last Post: Hector Monjardin
  Fused coating problem sprayloud 8 4,196 01-22-2016
10:30 PM
Last Post: KevinS
  Jet kote gun leakage problem Hector Monjardin 0 1,478 11-18-2015
04:24 PM
Last Post: Hector Monjardin
  Thermal barrier delamination problem Hector Monjardin 2 2,425 09-25-2015
11:05 AM
Last Post: Joris Kraak
  interface problem marzal 14 6,188 09-25-2015
11:00 AM
Last Post: Joris Kraak
  Problem for plasma powder line keane 1 2,066 08-18-2015
06:45 AM
Last Post: LEN WOOD
  Help,problem with the injector powder. Kirill 4 2,921 07-31-2015
06:51 PM
Last Post: loriolo
  Coating delamination problem texnicar 13 6,495 07-07-2015
10:37 PM
Last Post: Johnny_Blaze
  Metco 450 coating surface problem Yaakov 2 3,614 05-06-2015
01:54 PM
Last Post: loriolo

  • View a Printable Version
  • Send this Thread to a Friend
  • Subscribe to this thread


User(s) browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd

    Subscribe in a reader

    Contact Us | Thermal Spray Coatings | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication

Powered By MyBB, © 2002-2019 MyBB Group.


© Copyright Gordon England