Complete APS and flame system required

[TurbineRepair]

Hi all,

I'm looking to see if there are any complete thermal spray systems on the market. I need everything; booth, extraction, heat exchanger and chiller, power supply, control units, powder feed system, robot and controller. I would probably need a large grit blaster as well.

The system needs to be automated (via robot control) and capable of spraying APS (3MB/9MB) and flame (6P-II/5P).

If anyone has a complete system or a substantial part of one I would very interested to hear from you.

Thanks,
Jim

[plasmajet1990]

(03-10-2010 01:38 PM)TurbineRepair Wrote:  Hi all,

I'm looking to see if there are any complete thermal spray systems on the market. I need everything; booth, extraction, heat exchanger and chiller, power supply, control units, powder feed system, robot and controller. I would probably need a large grit blaster as well.

The system needs to be automated (via robot control) and capable of spraying APS (3MB/9MB) and flame (6P-II/5P).

If anyone has a complete system or a substantial part of one I would very interested to hear from you.

Thanks,
Jim

Hi,

Look here Metco 7M

http://www.youtube.com/watch?v=JXlOvoSj5Cc

Look here Metco 6P/5P

http://www.youtube.com/watch?v=DCJ0AgLeuRw

Ion

[Intel55]

(03-10-2010 01:38 PM)TurbineRepair Wrote:  Hi all,

I'm looking to see if there are any complete thermal spray systems on the market. I need everything; booth, extraction, heat exchanger and chiller, power supply, control units, powder feed system, robot and controller. I would probably need a large grit blaster as well.

The system needs to be automated (via robot control) and capable of spraying APS (3MB/9MB) and flame (6P-II/5P).

If anyone has a complete system or a substantial part of one I would very interested to hear from you.

Thanks,
Jim

New or used? Have used 7M upgrade with 9MC flowtubes

If looking for a new complete turnkey, send me a pm.
What is your location?

[shaikh.mec]

Dear Jim

Please visit http://www.mecpl.com as we are leading manufacturer of thermal Spray equipment and abrasive blating / shot peening machines. We are exporting 60% of our products to developed countries.

You can also reach me thru trade@mecpl.com / shaikh.mec@gmail.com

We are sure we can serve you in better way

regards
n.m.shaikh


Hi all,

I'm looking to see if there are any complete thermal spray systems on the market. I need everything; booth, extraction, heat exchanger and chiller, power supply, control units, powder feed system, robot and controller. I would probably need a large grit blaster as well.

The system needs to be automated (via robot control) and capable of spraying APS (3MB/9MB) and flame (6P-II/5P).

If anyone has a complete system or a substantial part of one I would very interested to hear from you.

Thanks,
Jim
[/quote]

[2DOGSTAR]

Hi Jim,
we have a PT A-2000 APS complete System with PT Twin Ten Feeder, we can offer a used Metco 9M Machine Mount or Praxair SG100 with 12" Extension. This system is for sale here in the UK, it has a valid Metco Calibration (Oct-2011 expires).

For other Equipment that we have to offer please visit
http://www.universalthermal.com

Please e-mail for further details
lee@universalthermal.co.uk