Cold spraying titanium nitride
07-29-2009, 09:08 AM,
#1
Cold spraying titanium nitride
Hi,
I've been trying to find out if it is possible to cold spray titanium nitride with a binder onto steel ? Just wondering if anyone has any experience or can point me to an article? I have searched with no success.

Many Thanks Big Grin
Reply
08-08-2009, 05:48 PM,
#2
RE: Cold spraying titanium nitride
Hi AnthonyE

Sign0016 to the Surface Engineering Forum.

Can't help on this one, other than to say with the right ductile binder (pretty sure not possible without) I think it should be possible with some development work.
Reply
08-21-2009, 12:09 PM,
#3
RE: Cold spraying titanium nitride
(07-29-2009, 09:08 AM)AnthonyE Wrote: Hi,
I've been trying to find out if it is possible to cold spray titanium nitride with a binder onto steel ? Just wondering if anyone has any experience or can point me to an article? I have searched with no success.

Many Thanks Big Grin

you may found some help from the technical department of the following companies,

(links dead)

regards
karunanidhi
Reply
11-11-2009, 10:55 PM,
#4
RE: Cold spraying titanium nitride
I would add Powdermet in the USA to the list of helpful companies. They can supply you with the powder you need for your trials.
Reply
11-13-2009, 11:26 AM,
#5
RE: Cold spraying titanium nitride
I'd also suggest contacting TWI (the welding institute) in the UK. I know they've been doing work with cold spray.
Simon Hiiemae
Sulzer Metco (UK) Ltd
01633 488 091
emailaddressisSimon.Hiiemae@Sulzer.com
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  nitride after HVOF Michael Mccarthy 1 2,008 12-03-2018, 10:49 AM
Last Post: Vadim Verlotski
  Cold rolling plasmajet1990 2 2,839 02-24-2017, 09:23 AM
Last Post: plasmajet1990
  Cold Spray with Tungsten Carbide LLBHW 3 12,686 04-24-2015, 01:06 AM
Last Post: Fermit
  Cold Spray Coatings on Titanium balance 4 8,697 04-24-2015, 12:59 AM
Last Post: Fermit
  YSZ deposited by Cold Spraying? Nadiir 4 5,431 03-22-2014, 11:26 AM
Last Post: Nadiir
  extraction for arc spraying aliminium titanium in small spaces JNRT 0 2,743 10-05-2013, 09:46 AM
Last Post: JNRT
  Cold Spraying & Cold spray combustion PPSABoyce 2 5,216 03-12-2012, 02:17 PM
Last Post: loriolo
  Cold Spraying porosity attin 4 7,096 03-09-2010, 04:30 PM
Last Post: drramc
  Cold spray Florin 3 5,830 02-22-2010, 12:39 AM
Last Post: cmkay@asbindustries.com
Question Hot or cold process? Gordon 3 6,611 06-23-2008, 05:08 PM
Last Post: Gordon



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd