Cold spray
02-08-2010, 11:19 PM,
#1
Cold spray
Dear colleagues

Is there anybody using the cold spray on this site? What it would be your overall feed-back about it? How expensive is the equipment and the running costs compared with HVOF?
Is there somebody spraying Ti for example with cold spray? How does it work? Thank you for your input!

Best regards,
Florin
Reply
02-09-2010, 08:56 PM, (This post was last modified: 02-10-2010, 04:05 AM by plasmajet1990.)
#2
RE: Cold spray
(02-08-2010, 11:19 PM)Florin Wrote: Dear colleagues

Is there anybody using the cold spray on this site? What it would be your overall feed-back about it? How expensive is the equipment and the running costs compared with HVOF?
Is there somebody spraying Ti for example with cold spray? How does it work? Thank you for your input!

Best regards,
Florin

Hi Florin,

For Ti is very good HVAF arc spray.

Ion
Reply
02-12-2010, 03:52 PM,
#3
RE: Cold spray
(02-08-2010, 11:19 PM)Florin Wrote: Dear colleagues

Is there anybody using the cold spray on this site? What it would be your overall feed-back about it? How expensive is the equipment and the running costs compared with HVOF?
Is there somebody spraying Ti for example with cold spray? How does it work? Thank you for your input!

Best regards,
Florin
Hello Florin

ColdSpray is less expensive than HVOF

Yes I have made Ti coating with cold spray, pure Ti work very fine, TA6V doesn't work. I have already show this to someone in your company! Really this far better than under APS. You can do test with LERMPS.
I think it is perhaps possible that Ti can be spray with simple low pressure coldspray at around 8 bar too but I never try it. To test.

Olivier
Reply
02-22-2010, 12:39 AM,
#4
RE: Cold spray
You can find information on our website at https://www.asbindustries.com both applications and high pressure equipment. Regards, Charlie Kay at asbindustries
At
(02-08-2010, 11:19 PM)Florin Wrote: Dear colleagues

Is there anybody using the cold spray on this site? What it would be your overall feed-back about it? How expensive is the equipment and the running costs compared with HVOF?
Is there somebody spraying Ti for example with cold spray? How does it work? Thank you for your input!

Best regards,
Florin
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  Cold rolling plasmajet1990 2 2,839 02-24-2017, 09:23 AM
Last Post: plasmajet1990
  Cold Spray with Tungsten Carbide LLBHW 3 12,686 04-24-2015, 01:06 AM
Last Post: Fermit
  Cold Spray Coatings on Titanium balance 4 8,696 04-24-2015, 12:59 AM
Last Post: Fermit
  YSZ deposited by Cold Spraying? Nadiir 4 5,431 03-22-2014, 11:26 AM
Last Post: Nadiir
  Cold Spraying & Cold spray combustion PPSABoyce 2 5,216 03-12-2012, 02:17 PM
Last Post: loriolo
  Cold Spraying porosity attin 4 7,096 03-09-2010, 04:30 PM
Last Post: drramc
  Cold spraying titanium nitride AnthonyE 4 7,696 11-13-2009, 11:26 AM
Last Post: SimonH
Question Hot or cold process? Gordon 3 6,611 06-23-2008, 05:08 PM
Last Post: Gordon



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd