Threaded Mode | Linear Mode

guru2707 · 06-15-2008, 02:08 AM

Hi,

we are doing hardchrome on valves,

bath is contaminated with chlorides how to remove the chloride ?

Guru

JAKDL · 07-29-2008, 06:36 PM

There are a lot of variables involved with something like this. You are probably better off replacing the bath. If it is not too bad you may be able to up the temperature to around 140F and plate it out.

Possibly Related Threads...
Thread:		Author	Replies:	Views:	Last Post
	Chrome plating replacement	Andy_UK	10	2,068	08-31-2011 06:40 PM Last Post: JJStick
	remove chrome plating	jaydev choudhary	5	1,635	06-10-2011 02:05 PM Last Post: Manish Choudhary
	Chrome Carbide & T800 Coating Property Change after heat treatment	Alexangel1226	5	6,006	09-30-2010 03:04 AM Last Post: arjfaye06
	Open grain chrome plating	z3braman	3	2,116	08-25-2010 12:28 AM Last Post: Gordon
	Chrome Oxide Coating: Free Chrome	rayudugirish	2	1,941	10-15-2009 02:30 AM Last Post: Gordon
	Tantalum based chrome oxide	djewell	1	1,624	03-19-2009 10:26 PM Last Post: Gordon
	Ceramic Densification of Chrome	Stephen Booth	4	3,791	03-11-2009 01:49 PM Last Post: KevinT
	Chrome Oxide Coating Failure	M Brecker	6	4,316	03-11-2009 01:36 PM Last Post: KevinT
	Chrome Carbide - Nickel Chrome or 95MXC in wire form for a Cylinder Liner?	mcg_pinsbushing	0	3,161	05-07-2008 10:00 AM Last Post: mcg_pinsbushing
	plasma sprayed chrome oxide	raviswanadha	1	2,750	04-02-2008 03:35 PM Last Post: Gordon
	hard chrome method	mechanic42	2	3,682	03-23-2007 07:53 AM Last Post: mechanic42