Cast iron powder or wire
12-03-2013, 10:15 AM,
#1
Cast iron powder or wire
Would you please inform me with the appropriate powder or wire to sprayed to restore the dimension of cast iron part.

Thank you very much
Reply
12-05-2013, 05:08 AM,
#2
RE: Cast iron powder or wire
Cast Iron Parts can be restored using NI-Al wire very effectively.
Regards.
Vijay
Reply
12-06-2013, 09:50 AM,
#3
RE: Cast iron powder or wire
flame spray metco 450 or 405 for wire
plasma metco 480 or 450 or many others.
wire arc tafa 75b
a few examples of NiAl 95/5
Reply
12-07-2013, 08:53 PM,
#4
RE: Cast iron powder or wire
Thank you all for your helpfull replies:
What do you think about TAFA 95MXC wire with iron base for cast iron substrate.
Reply
12-08-2013, 12:14 AM,
#5
RE: Cast iron powder or wire
That wire is a iron chrome which can be applied to cast. You can use that coating and tafa states can be applied excess of .060 thick.
I think that is a good top coat and I would build up or bond with a NiAl (75b) first if you require a large deposit. Otherwise less then .015 I would just use the 95mxc. Make sure the cast is clean and sometimes you might have to bake it to get all the oils out of it.
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
Star HVOF WCCo on Chilled Cast Iron(55HRC) tobjung 1 2,094 03-04-2021, 11:16 AM
Last Post: Vadim Verlotski
  difference between wire fed and powder thermal sprayers. wildlife360 4 4,450 04-13-2017, 05:22 PM
Last Post: loriolo
  Good preparation for cast iron base material plzc126330 3 4,168 11-24-2016, 01:17 AM
Last Post: plzc126330
  Bonding coating for Cast steel subsrate plzc126330 5 5,635 08-15-2016, 09:01 AM
Last Post: plzc126330
  Cast iron restoring sprayloud 1 3,200 04-11-2016, 12:54 AM
Last Post: aerotherm
Question Brown aluminum oxide VS Chilled iron grit Bacon 2 4,788 03-27-2015, 06:23 PM
Last Post: Bacon
  High Carbon Iron Based Wire proporties (Metco 8222) Met.Eng. 3 6,722 05-03-2014, 08:49 AM
Last Post: plasmajet1990
  HVOF on CAST IRON ROLL Guna 1 5,801 10-04-2010, 07:37 AM
Last Post: Gordon
  PTA Powder Composition for Cast Iron Stephen Booth 2 5,794 11-30-2009, 12:05 PM
Last Post: drramc
  twin wire arc spraying equipment for stainless steel wire, monel wire, etc. technovel 6 12,774 08-01-2008, 11:59 AM
Last Post: adam wintle
  Fusing of cast iron Arturas 1 6,966 08-16-2006, 01:23 PM
Last Post: Gordon



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd