Can rate of deposit be calculated?
09-04-2009, 02:24 PM,
#1
Question  Can rate of deposit be calculated?
I was wondering if rate of deposit can be calculated. I know the powder, nozzle, pressures, gas flows, spray distance range, spray rate lb/hr, coverage ft2/hr/0.001", deposit efficiency, part size, surface speed of part, etc. What plays a factor and what inputs result in the ability to calculate rate of deposit in unit of inch per pass?
Thank you.
Reply
09-07-2009, 03:20 PM,
#2
RE: Can rate of deposit be calculated?
Hi junebrooks

Sign0016 to the Surface Engineering Forum.

Well in theory, the coverage ft2/hr/0.001" stated for a specific powder and equipment under strictly control parameters should allow you to calculate rate of deposit in unit of inch per pass. You should only need to know the surface area and time to cover one pass.

In practice I would only use the stated coverage value as a rough guide. For accurate results you really need to take measurements from actual spraying under your specific conditions.

These threads should make useful reading on this subject:

surface-speed
wc-co16-coating-problem-enquiry
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  wear rate of D2 tool steel shantanu 3 5,767 07-13-2020, 06:13 PM
Last Post: astmsteel
  depostion rate dercrease cheshires science engineer 2 2,264 02-02-2020, 12:01 PM
Last Post: DMan
  How do you caculate deposit efficiency of thermal spray derek 2 6,311 02-25-2014, 08:10 PM
Last Post: Gordon
Shy flow rate conversion of propane in DJ2700 guang 1 4,937 12-16-2012, 11:52 PM
Last Post: KevGarty
  Deposit Efficiency js2know 2 5,530 09-03-2012, 04:05 PM
Last Post: loriolo
  HELP TO DEPOSIT SPRAY & FUSE COATING OF STELLITE POWDER --- REG sreenuvundela 10 13,564 03-14-2012, 11:46 AM
Last Post: Vijay Deshpande
  relationship between powder feed rate and carrier gas flow rate in plasma spray?????? fahad03092 4 9,956 11-20-2011, 01:16 AM
Last Post: ServiceTech
  Yield Rate ir_minja 1 3,521 03-12-2010, 10:17 AM
Last Post: loriolo
  Spray Rate ir_minja 1 4,107 11-05-2009, 02:48 PM
Last Post: Gordon
  Increase production rate of Grit Blasting of steel plates Adarsh 4 10,139 07-14-2009, 07:47 PM
Last Post: djewell
  how to increase TBC deposit speed? derek 11 16,684 05-06-2008, 11:26 PM
Last Post: hvofhamid
  Current or power more influential? Spray rate? fhyuan 1 5,811 08-20-2007, 07:33 PM
Last Post: Gordon



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd