Brown aluminum oxide VS Chilled iron grit
03-27-2015, 03:52 PM,
#1
Question  Brown aluminum oxide VS Chilled iron grit
Hi everybody,

I need to know if there can be any corrosion problem with chilled iron grit when used before thermal spray of of NiCr, NiCrAl or WC-Co.

We are using brown aluminum oxide but I was asked to look for ways to save on costs of abrasive. 3 years ago I've optimized the sieving system but now I need to go a step further. I read somewhere chilled iron grit wont breakup as fast as aluminum oxide so it can be reused more often before becoming too fine. I think it could be a good alternative to aluminum oxide but my bosses are concerned about corrosion caused by embedded particles in base metal and eventual spallation of the coating.

Is corrosion and spallation caused by embedded particle is something to be afraid of?

Thanks

Mike
Reply
03-27-2015, 05:57 PM,
#2
RE: Brown aluminum oxide VS Chilled iron grit
An HVAF gun can quickly and inexpensively grit blast parts before they are coated. The process is very fast and effective. The media is not expensive, but you will save a ton of time when preparing your parts for coating.
Reply
03-27-2015, 06:23 PM,
#3
RE: Brown aluminum oxide VS Chilled iron grit
Thanks djewell,

I know very well the capability of HVAF. In fact, we own one of your system. Once the system will be installed, grit blasting with the gun will be interesting. But we also have 4 more spray booth for plasma and flamespray so we will still need to grit blast the classic way.

Mike
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  Good preparation for cast iron base material plzc126330 3 2,133 11-24-2016, 01:17 AM
Last Post: plzc126330
  Cast iron restoring sprayloud 1 1,785 04-11-2016, 12:54 AM
Last Post: aerotherm
  Cast iron powder or wire M.Naguib 4 4,426 12-08-2013, 12:14 AM
Last Post: kschewe
  Aluminum oxide+titanium oxide schumi 11 11,322 04-19-2011, 11:15 PM
Last Post: loriolo
  HVOF on CAST IRON ROLL Guna 1 4,318 10-04-2010, 07:37 AM
Last Post: Gordon
  Removal of grit after grit-blasting? pulaunias 11 18,021 06-18-2010, 01:52 AM
Last Post: Gordon
  PTA Powder Composition for Cast Iron Stephen Booth 2 4,373 11-30-2009, 12:05 PM
Last Post: drramc
  Black coated aluminum fin & Hydrophilic coated aluminum fin comparison Lumbantoruan 3 11,094 01-30-2009, 07:51 AM
Last Post: Lumbantoruan
  Fusing of cast iron Arturas 1 5,458 08-16-2006, 01:23 PM
Last Post: Gordon



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd