Threaded Mode | Linear Mode

William · 07-29-2006, 06:12 AM

Dear all:
I want to look for about Axial III plasma Torch System. Can you tell me how to receive these information?
Thanks,
Best regards,
William

***Gordon*** · 07-29-2006, 06:59 PM

Hi William

Try this link

Code:

http://www.mettech.com/Axial_III.htm

Edit: This link is now broken, try

http://www.mettech.com/products_axial.htm

Thanks to Erick.

plasmajet1990 · (This post was last modified: 08-29-2008 06:22 AM by plasmajet1990.)

(07-29-2006 06:12 AM)William Wrote: Dear all:
I want to look for about Axial III plasma Torch System. Can you tell me how to receive these information?
Thanks,
Best regards,
William

Hi William,

Try this link:
http://www.members.shaw.ca/durantec/HVAP.html
http://www.members.shaw.ca/durantec/100he.html
http://www.pyrogenesis.com/content_en/te...orches.asp

Regards,
I. Trusca

Intel55 · 08-28-2008, 09:54 PM

(07-29-2006 06:12 AM)William Wrote: Dear all:
I want to look for about Axial III plasma Torch System. Can you tell me how to receive these information?
Thanks,
Best regards,
William

Curious as to why the Axial III versus a standard Metco type plasma gun or SG100? Lots more parameters out there ready to use.

Or the Triplex?

erick212 · 09-02-2008, 02:57 PM

The link above didn't seem to work....so here you go.

http://www.mettech.com/products_axial.htm

Also I have used these systems and they are very good.

Erick

***Gordon*** · 09-03-2008, 03:26 PM

Hi Erick

Thanks for spotting the dead link Smile

I will make an edit to make correct.

Cheers

Possibly Related Threads...
Thread:		Author	Replies:	Views:	Last Post
	WCCOCR coating with plasma	srihan_1	2	381	03-12-2012 11:15 PM Last Post: loriolo
	Plasma jet design	Adam_G	1	699	11-10-2011 04:08 AM Last Post: Gordon
	After mixing, do we need to sieve the powder for plasma spray???	fahad03092	1	583	10-18-2011 06:38 PM Last Post: Gordon
	Plasma spray or HVOF ?	Julio VALLES	11	9,108	10-07-2011 06:21 AM Last Post: Gordon
	Advantages of forced cooling of components during Plasma Spray Process -- Reg	sreenuvundela	1	776	09-19-2011 05:40 PM Last Post: Gordon
	Air Bubble defects in 75Cr3C2 -25NiCr Coatings deposited by detonation Spray System -	sreenuvundela	11	1,204	09-10-2011 05:14 AM Last Post: LEN WOOD
	Please recommend me what kind of plasma guns available to be used.	Lucas	6	1,168	06-20-2011 05:51 AM Last Post: Lucas
	Annealing of plasma-sprayed WC-Co coating	wangqun72	5	1,531	12-15-2010 07:28 AM Last Post: ives
	Plasma power control?!?!	Plasma Junkie	2	909	10-22-2010 03:47 PM Last Post: Plasma Junkie
	Plasma Jet Colour/Temperature	Rich	9	4,439	10-20-2010 04:40 PM Last Post: Gordon
	Air Filtration System	wrjordan	1	781	04-12-2010 12:20 PM Last Post: LEN WOOD
	Select a twin arc spray system	Florin	27	8,735	02-20-2010 03:42 PM Last Post: Florin
	machine of plasma coating	joanwang	3	3,067	08-04-2009 05:05 PM Last Post: Alexangel1226
	question about powder reaction during plasma spray process	greentree	3	1,816	03-13-2009 05:09 PM Last Post: Gordon
	T400 plasma spray	Bostick123	3	2,479	02-05-2009 12:32 PM Last Post: Gordon