Threaded Mode | Linear Mode

giuiori75 · 02-22-2016, 09:23 PM

Hi everyone,
does anyone have experience with Amdry 962 and 204 NS with F1 45° guns?
I would appreciate if you could suggest parameters for these powder.
Thanks in advance for your Kind support.

Regards

Joris Kraak · 03-19-2016, 07:12 AM

(02-22-2016 09:23 PM)giuiori75 Wrote: Hi everyone,
does anyone have experience with Amdry 962 and 204 NS with F1 45° guns?
I would appreciate if you could suggest parameters for these powder.
Thanks in advance for your Kind support.

Regards

contact me on joris.kraak@hotmail.com, I have the parameters and experience with this type of gun. I optimized complete processes at various companies in the Middle East so they will work.

Max Konev · 03-24-2016, 04:31 PM

Hi Joris,

Is F1 gun you are talking about from AMT? I am looking at Pros and Cons for switching to F1 from SG-2086 Praxair ID gun. Is it more robust than SG-2086? Is it worth switching? My application is TBC for combustion hardware for land gas turbines.

Thank you.

Possibly Related Threads...
Thread:		Author	Replies:	Views:	Last Post
	Reg:Diamalloy 1005 Parameters.	Dileep	0	471	10-06-2015 05:41 AM Last Post: Dileep
	TBS for Metco 450NS and AMDRY 2010	alvliew	3	918	06-14-2015 10:59 PM Last Post: Johnny_Blaze
	Grit Blasting Parameters	DanyGans	0	875	05-31-2015 12:10 PM Last Post: DanyGans
	AMDRY 1718- Hardness	alvliew	4	2,594	03-13-2015 11:21 PM Last Post: loriolo
	Parameters of Combustion wire gun	Turbo Machinery	3	1,839	05-25-2014 06:07 AM Last Post: Stephen Booth
	F4 Gun Process Parameters required for Metco 2043 Powder	sreenuvundela	1	1,857	01-16-2014 11:02 PM Last Post: loriolo
	Process Parameters for T400	scorpionking	0	1,174	12-17-2013 04:38 PM Last Post: scorpionking
	HVOF JK parameters for T800	plyer	7	6,345	08-05-2013 06:57 AM Last Post: wgg237
	F210 & F100 ID plasma gun spray parameters	plzc126330	1	1,348	02-25-2013 11:11 AM Last Post: adam wintle
	TopGun parameters for WC	sal	1	1,228	02-05-2013 10:26 PM Last Post: jensputzier
	Help,parameters to spray Zn/al	mustangero75	17	6,963	11-24-2012 08:33 PM Last Post: mustangero75
	HVOF -DJ Parameters	DrTofi	2	2,300	06-19-2012 09:25 PM Last Post: DrTofi
	Parameters that affect the hardness of Metco 204BNS TBC	thezombiesprayer	2	2,958	02-10-2012 02:09 AM Last Post: thezombiesprayer
	Better deposition without changing parameters and feedrate?	Pnewbie	5	3,091	02-03-2012 01:16 AM Last Post: LEN WOOD
	Jet kote III orthogonal spray parameters query	wangqun72	6	4,469	09-05-2010 05:57 AM Last Post: k09