Login

Joris Kraak · 08-09-2016, 07:41 AM,

Anyone has experience with bond strength of Al2O3-TiO2 on a Wccocr (Ra 4.0)?

Joris Kraak · 09-21-2016, 03:56 AM,

test done result is 18-25Mpa

Vig · 09-21-2016, 08:52 PM,

Thank you, Joris!
What was the hardness for WCCoCr and which torch have you used to apply Al2O3-TiO2?

Regards.

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	coating of Al2O3-TiO2 by HVOF	mlavar	8	8,978	09-12-2022, 09:02 AM Last Post: Coatingmate_Thomas
	Thick insulating coating Al2O3 - APS 9MB	Binhngo	3	1,601	12-29-2021, 08:52 AM Last Post: Stephen Booth
	HVOF WcCoCr Sealant	SSC	13	14,833	09-07-2020, 10:29 PM Last Post: loriolo
	Surface prep. with Garnet instead of Al2O3	velocity	1	2,186	05-14-2019, 04:44 PM Last Post: Lemster68
	High porosity in WcCoCr	demionkrishan	4	3,723	02-24-2019, 06:16 PM Last Post: loriolo
	HVAF vs. HVOF WCCoCr	Vig	19	12,523	06-05-2017, 12:05 PM Last Post: Vig
	Craking problem in Al2O3+ TiO2 plasma coating	Hector Monjardin	4	4,806	09-22-2016, 01:33 PM Last Post: Hector Monjardin
	HVOF WCCoCr Coating defect	Patrick K	5	8,714	05-25-2012, 10:08 PM Last Post: pakalano
	WCCOCR coating with plasma	srihan_1	2	4,935	03-12-2012, 11:15 PM Last Post: loriolo
	Tantalum and WcCoCr coatings	TintinMilou	7	12,500	09-13-2007, 12:53 AM Last Post: Gordon