Gordon England Surface Engineering Forum

Amdry 6420-Cr2O3 powder

[ Surface Engineering Forum ] [ Surface Engineering Message Board Archive ]
[ Surface Engineering Message Board Archive Index ] [ www.gordonengland.co.uk ]

Posted by Alper Vurar (212.64.200.130) on 07:19:55 22/07/05

With 9MB plasma gun,pure Cr2O3 powder,we have below problem;

the particles are not getting hot enough so they are bouncing off.

Any advice?

Follow Ups:

Re: Amdry 6420-Cr2O3 powder - Gordon England 15:26:32 08/08/05 (2)
- Re: Amdry 6420-Cr2O3 powder - Gordon England 15:37:18 08/08/05 (1)
  - Re: Amdry 6420-Cr2O3 powder - Alper 08:56:33 24/08/05 (0)

Post A Message!

Please go to the new Surface Engineering Forum as this old message board is a read only archive. Please copy and paste relevant information or link to this page if you wish to reactivate this thread on the new forum.