Posted by Juergen (217.6.15.137) on 16:18:05 20/07/05
In Reply to: ceramic coating posted by morteza
: dear
: i need some information about coating the st52 steel with ceramic oxide as a thermal barrier
: and i need the easiest way to coating
:
: thanks alot
------------------
Hi,
I suggest to spray first a metallical bond coating on the steel substrate: Thickness 100 - 300 microns (Material e.g. NiAl 95-5 or NiCrAlY)
and for top coating ZrO2-93-Y2O3-7. For both powders use APS (atmospherical plasma spraying).
The thickness of the TBC ZrO2-93-Y2O3-7 mainly depends on the temperature drop you need. But don´t forget the cooling of the coated base material. In this manner turbine airfoils will be coated.
Regards,
Juergen
Follow Ups:
Please go to the new Surface Engineering Forum as this old message board is a read only archive. Please copy and paste relevant information or link to this page if you wish to reactivate this thread on the new forum.