[ Surface Engineering Forum ] [ Surface Engineering Message Board Archive ]
[ Surface Engineering Message Board Archive Index ] [ www.gordonengland.co.uk ]
Posted by neil-s (193.158.56.62) on 23:55:48 23/08/04
Is it possable to obtain a direct correlation between hardness tests i.e. surface hardness test in HRc with a micro surface hardness test in Hv. for example a measured value on a surface of 56Rc would this equate to 613HV on a micro hardness test on the same sample at the same point.
Follow Ups:
Please go to the new Surface Engineering Forum as this old message board is a read only archive. Please copy and paste relevant information or link to this page if you wish to reactivate this thread on the new forum.
