Posted by John on August 27, 2003 at 10:14:00:
In Reply to: the best method? posted by wilson l. chin on August 17, 2003 at 17:16:16:
For a very cheap coating met2 through the arc gun is successful. The arc gun is a bit more tolerant on spray distance which is useful if doing pins. But be aware on some crankshafts they have hardened journals and pins. So I suggest you hardness check journals first along with a crank survey to check for cracking. Particularly if you have had an overheating failure.
Follow Ups:
Please go to the new Surface Engineering Forum as this old message board is a read only archive. Please copy and paste relevant information or link to this page if you wish to reactivate this thread on the new forum.
