Gordon England Surface Engineering Forum

Surface Engineering Message Board
Read Only Archives

[ New Surface Engineering Forum ] [ Search Message Boards Archives ]
[ Surface Engineering Message Board Archive Index ] [ www.gordonengland.co.uk ]

Can you tell me about the differents between nozzles of "G" and "GE" - Lifei 14:22:18 21/06/06(1)
- Re: Can you tell me about the differents between nozzles of "G" and "GE" - Gordon England 16:11:05 21/06/06(0)
Re: Adhesion Promoter - Arunachalam Lekshmanan 16:10:10 19/06/06(0)
HELP... - Emma 14:47:44 19/06/06(0)
natural gas flow correction - muthukumar 13:44:29 19/06/06(1)
- Re: natural gas flow correction - Gordon England 14:10:01 19/06/06(0)
Re: Use of coating above 1700K - chaitanya 12:43:36 19/06/06(0)
hardness of coating on the metal - ram prasad shukla 12:08:32 19/06/06(1)
- Re: hardness of coating on the metal - Gordon England 13:02:30 19/06/06(0)
Corrosive and High Temperature Coating - Kenneth Cai 14:51:37 18/06/06(2)
- Re: Corrosive and High Temperature Coating - Gordon England 12:05:01 19/06/06(1)
  - Re: Corrosive and High Temperature Coating - Kenneth Tsai 11:06:53 20/06/06(0)
Hardening Stainless Steel - Peter 03:31:01 18/06/06(1)
- Re: Hardening Stainless Steel - Gordon England 11:36:27 19/06/06(0)
Chilled Cast Iron - Coating - Azim 04:34:44 14/06/06(1)
- Re: Chilled Cast Iron - Coating - Gordon England 15:02:40 14/06/06(0)
we want large quantity of tungsten scrap - tong lidong 03:19:56 14/06/06(0)
Re: Diamond powder - Mike 03:15:40 14/06/06(0)
Coating on Crankshaft - Chris 10:58:36 13/06/06(4)
- Re: Coating on Crankshaft - Wojciech 13:01:57 13/06/06(3)
  - Re: Coating on Crankshaft - Chris 15:13:56 13/06/06(2)
    - Re: Coating on Crankshaft - ram chattopadhyay 16:48:38 13/06/06(1)
      - Re: Coating on Crankshaft - Gordon England 17:52:39 13/06/06(0)
COF - Naveed ahmed 15:45:29 12/06/06(0)
Re: Diamond powder - jamal 13:16:21 11/06/06(0)
recovery of TiO2 from red mud of alumina refinery plant - Mehdi Fattahi 07:56:34 11/06/06(0)
Re: Teflon/ptfe coatings - Sue Newman 15:47:02 10/06/06(0)
Inconel 625, HVOF - PLasma - Régis Pittier 13:07:42 07/06/06(2)
- Re: Inconel 625, HVOF - PLasma - Gordon England 15:19:30 07/06/06(1)
  - Re: Inconel 625, HVOF - PLasma - ram chattopadhyay 17:12:35 07/06/06(0)
Epoxy masking burnout - Hon 02:07:42 07/06/06(0)
etchants for ni-cr and wc-co - rambabu 05:44:58 05/06/06(1)
- Re: etchants for ni-cr and wc-co - Gordon England 13:53:16 05/06/06(0)
Thermal Spray Nozzles - Barton Smith 19:24:34 04/06/06(0)
Gas proof WC 86-10-4 coating - Torkjell Lisland 12:00:41 02/06/06(0)
Coating on Chilled Cast Iron - Azim 16:46:38 01/06/06(3)
- Re: Coating on Chilled Cast Iron - Coating on Chilled Cast Iron 04:31:14 14/06/06(1)
  - Re: Coating on Chilled Cast Iron - Gordon England 15:00:59 14/06/06(0)
- Re: Coating on Chilled Cast Iron - Gordon England 00:33:58 02/06/06(0)
Coating on SS 304L - Nishikant Mandal 10:41:53 31/05/06(2)
- Re: Coating on SS 304L - Tang 16:10:40 07/06/06(0)
- Re: Coating on SS 304L - ram chattopadhyay 22:49:50 31/05/06(0)
Re: Hardeness Comparison Tables For Different Metals - nl008 04:32:36 30/05/06(1)
- Re: Hardeness Comparison Tables For Different Metals - ram chattopadhyay 23:02:55 31/05/06(0)
Bond test adhesive - Joel Voyer 12:30:59 29/05/06(0)
Re: procurement of rokide spray gun - mohammad izanloo 23:16:09 28/05/06(0) Microhardness of Thermal Barrier Coatings - raj 20:34:16 26/05/06(0)
Coating on EN24 with low coefficient of Friction and impact resistance - Pankaj Thakur 06:45:18 26/05/06(0)
key process variables for APS - becky 11:49:59 25/05/06(6)
- Re: key process variables for APS - Gordon England 01:02:42 02/06/06(5)
  - Re: key process variables for APS - becky 09:57:52 02/06/06(4)
    - Re: key process variables for APS - Gordon England 21:49:22 02/06/06(3)
      - Re: key process variables for APS - becky 10:26:29 06/06/06(2)
        Re: key process variables for APS - Gordon England 14:20:52 06/06/06(1)
        Re: key process variables for APS - Wojciech 09:21:40 12/06/06(0)
comparative hardnesses - Joe Diesendruck 00:40:14 25/05/06(3)
- Re: comparative hardnesses - Gordon England 02:28:33 25/05/06(2)
  - Re: comparative hardnesses - Joe Diesendruck 00:21:27 26/05/06(1)
    - Re: comparative hardnesses - Gordon England 00:45:40 02/06/06(0)
contamination in TBC bond coat - Hong 01:00:28 24/05/06(4)
- Re: contamination in TBC bond coat - Gordon England 02:52:04 25/05/06(3)
  - Re: contamination in TBC bond coat - Hong 17:32:49 26/05/06(2)
    - Re: contamination in TBC bond coat - Leon 17:58:22 26/05/06(1)
      - Re: contamination in TBC bond coat - Gordon England 11:07:42 31/05/06(0)
Fiche technique du Metcoseal SA - Guy ROLLAND 15:26:41 23/05/06(1)
- Re: Fiche technique du Metcoseal SA - Gordon England 17:21:11 23/05/06(0)
Adhesion measurement for very thin coating - Rahman 10:30:41 22/05/06(1)
- Re: Adhesion measurement for very thin coating - jaro 13:01:06 26/05/06(0)
WC standards - Tanya 12:44:59 19/05/06(1)
- Re: WC standards - Gordon England 18:07:49 23/05/06(0)
spare for Rockwell Hardness Tester - Imran Sadiq 12:43:41 19/05/06(0)
Wear resistance properties - - Vilmar Aesoy 10:16:04 19/05/06(1)
- Re: Wear resistance properties - - ram chattopadhyay 15:30:46 19/05/06(0)
Information required - Shahzad Maqsood Khan 05:14:59 19/05/06(0)
Metalizing - Papapanos George 13:45:22 18/05/06(1)
- Re: Metalizing - Gordon England 18:27:06 23/05/06(0)
Rolls which transport 1000C steel slabs - Arturas 10:11:25 17/05/06(0)
Calculate residual stress - Anders Marklund 08:06:32 17/05/06(1)
- Re: Calculate residual stress - Alexei Goncharov 10:44:00 23/05/06(0)
Re: Plasma spray Ti6Al4V - TEJAS S SHAH 07:09:32 15/05/06(0)
grit,grade,micron conversion - Amol 06:43:23 15/05/06(0)
Information about everything of thermal spray process - Yessid Velasquez 20:05:37 11/05/06(2)
- Re: Information about everything of thermal spray process - Gordon England 20:36:08 14/05/06(1)
  - Re: Information about everything of thermal spray process - Yessid Velasquez 17:40:16 15/05/06(0)
PEEK coating - Mary HU 09:46:19 11/05/06(0)
Aluminum oxide coating thickness - Ivor Guiney 17:21:02 10/05/06(2)
- Re: Aluminum oxide coating thickness - Hyun-Ki 13:49:28 18/05/06(0)
- Re: Aluminum oxide coating thickness - Gordon England 20:24:37 14/05/06(0)
Re: books on wear & surface engineering - ram chattopadhyay 01:22:45 10/05/06(0)
Effect of injector diameter on particle behavior - Kang Chang Wei 07:57:54 09/05/06(1)
- Re: Effect of injector diameter on particle behavior - Gordon England 19:57:22 14/05/06(0)
Thermal Spray Thickness - Steve Quinn 21:19:30 08/05/06(2)
- Re: Thermal Spray Thickness - Alper 07:30:40 09/05/06(1)
  - Re: Thermal Spray Thickness - ram chattopadhyay 17:05:08 09/05/06(0)
Zinc metallizing - Deepak Achuthan 10:40:17 08/05/06(0)
Ceramic bar spraying - Pu Jian 03:12:25 07/05/06(0)
PTFE COATINGS - Canan BARIS 12:25:34 06/05/06(0)
Magnitude of thermal stress and threshold - Kang 07:52:38 06/05/06(0)
Injection angle set-up - Andrea 18:29:28 05/05/06(4)
- Re: Injection angle set-up - Yessid Velasquez 19:17:18 15/05/06(0)
- Re: Injection angle set-up - Juergen 15:54:45 08/05/06(2)
  - Re: Injection angle set-up - Andrea 11:19:07 11/05/06(1)
    - Re: Injection angle set-up - Gordon England 14:58:46 14/05/06(0)
WC Plasma Coating - Pierre 22:17:00 04/05/06(1)
- Re: WC Plasma Coating - Gordon England 14:49:41 14/05/06(0)
coating stress reduction - Andrea Bencs 18:04:03 04/05/06(1)
- Re: coating stress reduction - Pierre 22:19:03 04/05/06(0)
hardness of glass - James Fitzgerald 00:13:02 01/05/06(0)
electroless - mahmood noroozi 11:12:46 30/04/06(0)
Low E Glass - Mirza Tihic 14:40:36 28/04/06(0)
DVC TBC coating - Alex 10:41:52 28/04/06(1)
- Re: DVC TBC coating - Gordon England 14:30:28 14/05/06(0)
PTA coatings of Nimonic Valves - Pepe 04:41:09 27/04/06(1)
- Re: PTA coatings of Nimonic Valves - ram chattopadhyay 16:35:13 03/05/06(0)
enquiry - Aswan 16:41:46 24/04/06(0)
grinding / machining of CuNiIn coatings - t faucette 01:26:45 24/04/06(1)
- Re: grinding / machining of CuNiIn coatings - Gordon England 14:22:26 14/05/06(0)
Residual strain stress coating model - Alexei Goncharov 14:08:32 21/04/06(1)
- Re: Residual strain stress coating model - Alexei Goncharov 16:01:04 28/04/06(0)
metallographic preparation of al2o3 coating - jaro polak 13:51:15 21/04/06(1)
- Re: metallographic preparation of al2o3 coating - Gordon England 14:05:56 14/05/06(0)
Spraying of WC-12%Co - Arturas 13:07:17 20/04/06(4)
- Re: Spraying of WC-12%Co - Hong 14:53:56 20/04/06(3)
  - Re: Spraying of WC-12%Co - Arturas 18:45:06 20/04/06(2)
    - Re: Spraying of WC-12%Co - Hong 16:34:10 24/04/06(1)
      - Re: Spraying of WC-12%Co - Gordon England 13:24:15 14/05/06(0)
Chrome plant - Engr.Palash 12:50:26 20/04/06(0)
Thermal Spray Apllicator certificate - Rayudu Girish 11:56:15 20/04/06(1)
- Re: Thermal Spray Apllicator certificate - Gordon Engalnd 12:57:33 14/05/06(0)
College Student Project, Need Help - College Student 04:48:34 18/04/06(0)
Re: PWHT and Pre Heating tempreture - RAMESH 07:15:49 17/04/06(0)
Sealing zinc-aluminum thermal spray coating - Joe I 03:03:53 16/04/06(1)
- Re: Sealing zinc-aluminum thermal spray coating - Gordon England 12:42:04 14/05/06(0)
Alumina on ITO glass - Mahaprasad Kar 21:52:35 13/04/06(0)
Try this method. - Faizil Wasbari 10:50:01 11/04/06(0)
spray can thermal coat? - Ben Dover 03:19:42 09/04/06(0)
Re: I am interested in TiO2 nano coatings - Wong Weng Heng 17:13:28 08/04/06(0)
job - Arturas 10:38:37 07/04/06(0)
fusing of long tube - Arturas 10:27:26 07/04/06(1)
- Re: fusing of long tube - Gordon England 19:26:47 07/04/06(0)
Fusing of NiCrBSi - Arturas 10:19:35 07/04/06(1)
- Re: Fusing of NiCrBSi - Gordon England 19:14:36 07/04/06(0)
Looking for used equipment - Jonathan 02:20:20 07/04/06(1)
metalizing Stainless steel shaft - James 21:29:14 06/04/06(1)
- Re: metalizing Stainless steel shaft - Gordon England 18:48:51 07/04/06(0)
estimating coverage of HVOF Inconel 625 - HammerHead 13:28:44 06/04/06(1)
- Re: estimating coverage of HVOF Inconel 625 - Gordon England 18:15:20 07/04/06(0)
Nano TiO2 - R. K. Singh 09:29:08 04/04/06(0)
HVOF spray Ti6Al4V - Greg Gibbons 15:40:44 03/04/06(2)
- Re: HVOF spray Ti6Al4V - Alexei Goncharov 05:41:13 05/04/06(0)
- Re: HVOF spray Ti6Al4V - Gordon England 18:33:06 04/04/06(0)
HVOF - Repair to WC-Co-Cr coating - John 02:40:09 30/03/06(2)
- Re: HVOF - Repair to WC-Co-Cr coating - Gordon England 23:08:19 30/03/06(1)
  - Re: HVOF - Repair to WC-Co-Cr coating - Alex 01:47:40 31/03/06(0)
spray and fuse - jonathan 03:15:05 29/03/06(0)
ceramic coating on inner surface of spindle - Geetha 08:42:40 25/03/06(0)
high temp turbine blade abradable coating - Manny 16:24:38 23/03/06(8)
- Re: high temp turbine blade abradable coating - Gordon England 17:29:41 23/03/06(7)
  - Re: high temp turbine blade abradable coating - Manny 18:07:13 23/03/06(6)
    - Re: high temp turbine blade abradable coating - Gordon England 18:50:40 23/03/06(5)
      - Re: high temp turbine blade abradable coating - Manny 19:08:18 23/03/06(3)
        Re: high temp turbine blade abradable coating - Gordon England 14:15:24 24/03/06(2)
        Re: high temp turbine blade abradable coating - manny 23:18:01 24/03/06(1)
        Re: high temp turbine blade abradable coating - Gordon England 00:43:05 25/03/06(0)
Pull Test for flame spray (aluminium) - Jonathan 12:34:00 23/03/06(1)
- Re: Pull Test for flame spray (aluminium) - Gordon England 17:40:24 23/03/06(0)
Procedure for plasma coatings - Jonathan 09:20:04 22/03/06(1)
Re: Nano TiO2 for anti-UV, anti-bacterial and self-cleaning - Anthony Vlahos 02:43:39 22/03/06(1)
- Re: Nano TiO2 for anti-UV, anti-bacterial and self-cleaning - Ilija Nasov 22:55:22 01/05/06(0)
Why do coatings crack? - Artur 19:46:12 21/03/06(3)
- Re: Why do coatings crack? - Gordon England 16:26:54 23/03/06(2)
  - Re: Why do coatings crack? - Artur 20:09:02 25/03/06(1)
    - Re: Why do coatings crack? - Gordon England 11:44:37 29/03/06(0)
nonstick coat - Michael Hawks 13:21:04 21/03/06(0)
6P2 - mikko kylmalahti 06:35:11 21/03/06(0)
Arc sprayed Al - Hong 14:48:42 20/03/06(9)
- Re: Arc sprayed Al - Gordon England 16:39:22 21/03/06(8)
  - Re: Arc sprayed Al - Hong 00:33:46 22/03/06(7)
    - Re: Arc sprayed Al - Gordon England 18:06:18 23/03/06(6)
      - Re: Arc sprayed Al - Hong 12:40:46 24/03/06(5)
        Re: Arc sprayed Al - Gordon England 13:48:05 24/03/06(0)
coversion vickers to knoop - Oguz Baldik 09:28:52 20/03/06(1)
- Re: coversion vickers to knoop - Gordon England 16:48:00 21/03/06(0)
Nitriding - Jim Mahan 23:11:42 17/03/06(2)
- Re: Nitriding - ram chattopadhyay 06:42:38 20/03/06(1)
  - Re: Nitriding - Gordon England 18:25:27 23/03/06(0)
stop Zirconia from cracking - Hong 22:44:25 15/03/06(3)
- Re: stop Zirconia from cracking - Alexei Goncharov 10:46:49 16/03/06(2)
  - Re: stop Zirconia from cracking - Gordon England 13:31:35 16/03/06(1)
    - Re: stop Zirconia from cracking - Hong 14:50:52 20/03/06(0)
Help me with the surface finish - Hon 21:54:08 15/03/06(1)
- Re: Help me with the surface finish - Gordon England 16:54:29 21/03/06(0)
nonstick surface - Michael hawks 16:37:29 15/03/06(2)
- Re: nonstick surface - Gordon England 13:50:00 16/03/06(1)
  - Re: nonstick surface - Michael 09:00:59 17/03/06(0)
Best HVOF powder? - John Groweg 14:49:01 15/03/06(0)
TC Coating by HVOF - Karen Jin 06:35:49 14/03/06(4)
- Re: TC Coating by HVOF - Wire 22:55:14 06/04/06(0)
- Re: TC Coating by HVOF - Adam Wintle 10:16:40 15/03/06(2)
  - Re: TC Coating by HVOF - Alper Vurar 14:13:51 15/03/06(1)
    - Re: TC Coating by HVOF - Wire 23:09:26 06/04/06(0)
Need your help! - Michael Salahi 10:55:58 13/03/06(1)
- Re: Need your help! - Alper Vurar 11:29:04 13/03/06(0)
Hardening - Rocco Zani 13:35:39 09/03/06(0)
420 SS Published Bond Strengths - Craig 00:04:53 09/03/06(1)
- Re: 420 SS Published Bond Strengths - Adam Wintle 10:13:14 15/03/06(0)
Plasma Spray Guns - Michael Salahi 11:23:08 08/03/06(1)
- Re: Plasma Spray Guns - adam@weartech.co.za 10:08:55 15/03/06(0)
Effect of Sub-Micron particles and Oxides on HVOF - Ken Watson 13:31:35 07/03/06(2)
- Re: Effect of Sub-Micron particles and Oxides on HVOF - Hong Wang 13:00:47 08/03/06(1)
  - Re: Effect of Sub-Micron particles and Oxides on HVOF - Ken Watson 13:05:14 08/03/06(0)
Coating Zirconia onto Aluminum foil - Pamela 14:27:27 06/03/06(2)
- Re: Coating Zirconia onto Aluminum foil - Gordon England 14:20:52 05/04/06(0)
HVOF literature - Laura 17:14:12 03/03/06(2)
- Re: HVOF literature - Adam Wintle 10:05:14 15/03/06(1)
  - Re: HVOF literature - Laura 18:44:17 16/03/06(0)
Re: Surface pattern of electrically-conductive high points or bumps - Richard Barnwell 15:26:56 03/03/06(0)
Metco 7M-7XX nozzles - Adam Wintle 11:21:06 03/03/06(0)
Zinc Pot Roll Sealer - Adam Wintle 10:12:42 03/03/06(0)
max. substrate hardness for HVOF - John Groweg 21:40:19 02/03/06(1)
- Re: max. substrate hardness for HVOF - Gordon England 14:58:10 05/04/06(0)
Thermal Seramic Coating - Canan BARIS 12:41:14 02/03/06(0)
help! - hung nguyen 10:08:41 01/03/06(1)
- Re: help! - Gordon England 12:53:26 01/03/06(0)
Re: Thermal Barrier Coatings - Dipti 13:41:48 28/02/06(2)
- Re: Thermal Barrier Coatings - ram chattopadhyay 06:48:14 08/03/06(0)
- Re: Thermal Barrier Coatings - Gordon England 14:01:54 28/02/06(0)
Hardness conversion - Terry McGinnis 18:09:42 24/02/06(1)
- Re: Hardness conversion - Gordon England 00:54:08 25/02/06(0)
AT13 spraying by plasma on substrate of Bakelite PF6501 - Pu Jian 04:38:05 23/02/06(0)
Metal Spray of Babbit/whitemetal - Kieran Rice 02:53:56 23/02/06(2)
- Re: Metal Spray of Babbit/whitemetal - Will Herlaar 12:16:24 28/02/06(0)
- Re: Metal Spray of Babbit/whitemetal - Adam Wintle 10:22:32 23/02/06(0)
coating or coating material - Will Herlaar 13:27:12 20/02/06(0)
Re: Microhardness of WC/Co coating and optimum gas flow parameters - vahidnematy 05:17:37 20/02/06(1)
- Re: Microhardness of WC/Co coating and optimum gas flow parameters - Gordon England 11:54:22 20/02/06(0)
Stress Relieving carbon steel tubes panels. - Al Patete 19:14:46 11/02/06(0)
masking - Hong 16:21:09 11/02/06(3)
- Re: masking - Alexei Goncharov 19:13:38 24/02/06(0)
- Re: masking - Adam Wintle 10:18:11 23/02/06(0)
- Re: masking - Gordon England 15:59:03 20/02/06(0)
AMDRY 9951 - Hong 16:12:33 11/02/06(1)
- Re: AMDRY 9951 - Gordon England 12:01:27 20/02/06(0)
Re: Plasma Coating - A K Sethi 11:15:27 10/02/06(0)
Spraying copper on steel plate? - Will 23:50:16 09/02/06(5)
- Re: Spraying copper on steel plate? - Alexei Goncharov 08:17:54 10/02/06(4)
  - Re: Spraying copper on steel plate? - Gordon England 11:47:35 10/02/06(3)
    - Re: Spraying copper on steel plate? - ram chattopadhyay 02:58:42 15/02/06(0)
    - Re: Spraying copper on steel plate? - Will 16:55:37 11/02/06(1)
      - Re: Spraying copper on steel plate? - Alexei Goncharov 07:17:50 13/02/06(0)
Density of flame sprayed coating - Vivek 17:15:51 08/02/06(1)
- Re: Density of flame sprayed coating - Gordon England 13:03:34 09/02/06(0)
I had constructed the piston compressive ring ensuring full capsulation - Vladislav Lakoza 12:24:11 08/02/06(0)
Synchro ring flame spray machine - Adam Wintle 14:24:09 07/02/06(0)
Nimonic 80A - Will Herlaar 13:56:52 06/02/06(2)
- Re: Nimonic 80A - ram chattopadhyay 05:04:52 07/02/06(0)
- Re: Nimonic 80A - Gordon England 15:22:05 06/02/06(0)
coating with nano tecnology - atefeh 06:30:49 04/02/06(2)
- nano ? i want 2 know - udana 10:45:24 30/04/06(0)
- Re: coating with nano tecnology - Will Herlaar 14:46:17 06/02/06(0)
PMC coating - sid 01:46:00 03/02/06(0)
Nature and values of coefficient of usage of powders - Alexei Goncharov 15:07:21 02/02/06(0)
Sacrificial Cathotic Protection - Wil 14:53:42 31/01/06(1)
- Re: Sacrificial Cathotic Protection - Juergen 08:32:57 21/02/06(0)
porosity of coatings - Alexei Goncharov 09:47:11 31/01/06(2)
- Re: porosity of coatings - Gordon England 13:24:17 02/02/06(0)
stellite grade - Prashant Akhare 06:19:18 31/01/06(4)
- Re: stellite grade - spwammy 18:29:43 10/05/06(0)
- Re: stellite grade - apwammy 18:28:03 10/05/06(0)
- Re: stellite grade - Phil Costigan 11:47:15 13/03/06(0)
- Re: stellite grade - ram chattopadhyay 05:23:15 07/02/06(0)
required nano size TiO2 - balgovind tiwari 04:45:58 31/01/06(0)
Re: Metllizing gun - philip van hees 20:47:16 28/01/06(3)
- Re: Metllizing gun - Will Herlaar 10:12:27 30/01/06(1)
  - Re: Metllizing gun - Lee Worley CTA Ltd 11:45:20 14/02/06(0)
chromium removal from eqous solutoin - khizar hussain shahPAKISTAN 15:13:02 28/01/06(0)
WCB , CA-15 heat treatment informatio - Bhupendra Makwana 03:34:55 28/01/06(0)
T800 Coating Thickness limit by HVOF - Alex 12:12:37 26/01/06(7)
- Re: T800 Coating Thickness limit by HVOF - Gordon England 15:04:11 26/01/06(6)
  - Re: T800 Coating Thickness limit by HVOF - Alex 00:20:10 29/03/06(5)
    - Re: T800 Coating Thickness limit by HVOF - Gordon England 12:27:50 29/03/06(4)
      - Re: T800 Coating Thickness limit by HVOF - Alexei Goncharov 16:11:30 30/03/06(3)
        Re: T800 Coating Thickness limit by HVOF - Alex 01:38:13 31/03/06(2)
        Re: T800 Coating Thickness limit by HVOF - Gordon England 17:41:52 04/04/06(1)
        Re: T800 Coating Thickness limit by HVOF - ALex 17:06:04 05/04/06(0)
Met Jet II - Hong 17:49:25 25/01/06(1)
- Re: Met Jet II - Gordon England 00:50:41 26/01/06(0)
Using spray process in electroplating process - Raoul 21:26:22 18/01/06(1)
Polishing Hydroxyapatite coating by FS sprayed - Vivek 19:07:26 18/01/06(1)
- Re: Polishing Hydroxyapatite coating by FS sprayed - Gordon England 15:54:49 19/01/06(0)
Hardness of Al-12Si APS coating - Hong Wang 15:33:09 18/01/06(2)
- Re: Hardness of Al-12Si APS coating - Gordon England 14:48:53 19/01/06(1)
  - Re: Hardness of Al-12Si APS coating - Hong Wang 17:54:08 19/01/06(0)
Work - Brian Whitehead 12:21:01 17/01/06(0)
Ti-Al-V Powder - Andrea 15:22:24 16/01/06(0)
Adhesion testing of flame sprayed ceramic coating - Vivek 14:02:17 14/01/06(1)
- Re: Adhesion testing of flame sprayed ceramic coating - Gordon England 13:07:55 15/01/06(0)
Removal of Plasma Sprayed Diamalloy 2100 - Christian 02:57:43 13/01/06(7)
- Re: Removal of Plasma Sprayed Diamalloy 2100 - Juergen 15:11:45 13/01/06(6)
  - Re: Removal of Plasma Sprayed Diamalloy 2100 - Gordon England 17:17:00 13/01/06(5)
    - Re: Removal of Plasma Sprayed Diamalloy 2100 - Jonathan Padilla 23:36:48 19/01/06(4)
      - Re: Removal of Plasma Sprayed Diamalloy 2100 - Gordon England 02:04:27 20/01/06(3)
        Re: Removal of Plasma Sprayed Diamalloy 2100 - Jonathan Padilla 15:36:49 20/01/06(2)
        Re: Removal of Plasma Sprayed Diamalloy 2100 - Christian. 21:45:06 22/01/06(1)
        Re: Removal of Plasma Sprayed Diamalloy 2100 - Gordon England 19:48:07 23/01/06(0)
What is etchant for Aumina,Titania and Zirconia - Vivek 15:17:55 11/01/06(3)
- Re: What is etchant for Aumina,Titania and Zirconia - Gordon England 17:00:24 11/01/06(2)
  - Re: What is etchant for Aumina,Titania and Zirconia - vivek 16:56:21 12/01/06(1)
    - Re: What is etchant for Aumina,Titania and Zirconia - Gordon England 18:01:49 13/01/06(0)
adhesion of coatings - Alecxei Goncharov 14:22:37 11/01/06(5)
- Re: adhesion of coatings - Gordon England 18:36:51 13/01/06(4)
  - Re: adhesion of coatings - Hong Wang 19:52:34 17/01/06(3)
    - Re: adhesion of coatings - Gordon England 14:59:47 19/01/06(2)
      - Re: adhesion of coatings - Arturas 13:24:42 07/04/06(1)
        Re: adhesion of coatings - Gordon England 19:48:11 07/04/06(0)
Gas flow rate calculation - Irwan 14:57:16 10/01/06(3)
- Re: Gas flow rate calculation - dharita 10:28:24 08/06/06(0)
- Re: Gas flow rate calculation - mallik 09:37:11 04/05/06(0)
- Re: Gas flow rate calculation - Wahyu Purnomo 23:59:09 15/03/06(0)
Same oxide cluster problem in Metco 45 coat. - Hong Wang 21:16:59 06/01/06(1)
- Re: Same oxide cluster problem in Metco 45 coat. - Gordon England 19:28:21 08/01/06(0)
TBC coating question - Hong Wang 16:16:17 06/01/06(9)
- Re: TBC coating question - Hong Wei Wang 16:28:46 16/01/06(8)
  - Re: TBC coating question - Hong Wang 20:50:06 17/01/06(7)
    - Re: TBC coating question - Gordon England 15:36:08 19/01/06(0)
Re: I am interested in TiO2 nano coatings - Dr.Ilija Nasov 23:56:11 05/01/06(0)
A coated equivalent for a Molybdenum component ? - Simon Warren 11:35:02 03/01/06(2)
- Re: A coated equivalent for a Molybdenum component ? - Roger Corsey 20:00:45 02/02/06(0)
please give me some ideas. - philip 20:28:04 02/01/06(2)
- Re: please give me some ideas. - ram chattopadhyay 03:09:19 05/01/06(1)
  - Re: please give me some ideas. - philip 20:15:53 05/01/06(0)
new year greetings - ram chattopadhyay 07:26:14 01/01/06(0)
Surface preparation for microhardness - Vivek 20:41:02 31/12/05(3)
- Re: Surface preparation for microhardness - Gordon England 12:53:42 05/01/06(2)
  - Re: Surface preparation for microhardness how to recognised it - Vivek 15:13:14 11/01/06(1)
    - Re: Surface preparation for microhardness how to recognised it - Gordon England 16:46:44 11/01/06(0)
Premature Nozzle wear in Plasma Torch - Pierre 15:03:40 28/12/05(1)
- Re: Premature Nozzle wear in Plasma Torch - Gordon England 13:30:28 05/01/06(0)
density of plasma coating - Santosh 19:03:00 20/12/05(2)
- Re: density of plasma coating - Hong Wang 19:03:59 06/01/06(0)
- Re: density of plasma coating - Madila Awalini 08:39:27 02/01/06(0)
I need some articles. - Jen. 16:16:22 20/12/05(1)
- Re: I need some articles. - ram chattopadhyay 04:21:17 22/12/05(0)
We want to buy ceramic pieces - Canan Baris 12:52:09 15/12/05(0)
technikdesigner - vietanh 14:20:01 14/12/05(0)
Chromium Oxide Modulus - Mark Kelly 02:35:00 13/12/05(2)
- Re: Chromium Oxide Modulus - Gordon England 13:59:27 13/12/05(1)
  - Thank you - Mark Kelly 01:16:07 16/12/05(0)
looking for a qualified turnkey supplier for Nickel dispersion Coating - Eric Chen 15:02:23 10/12/05(1)
- Re: looking for a qualified turnkey supplier for Nickel dispersion Coating - anthony Poeton 19:25:24 11/12/05(0)
manufacturers nanopowders - J.N.Balaraju 13:43:59 08/12/05(0)
Thermal spraying - Dr. Andras Molnar 09:18:42 08/12/05(1)
- Re: Thermal spraying - ram chattopadhyay 06:58:55 09/12/05(0)
Cluster oxide in Inco718 - Alex Chan 02:32:57 08/12/05(14)
- Re: Cluster oxide in Inco718 - Gordon England 16:32:42 09/12/05(13)
  - Re: Cluster oxide in Inco718 - Alex Chan 04:37:37 21/12/05(11)
    - Re: Cluster oxide in Inco718 - Gordon England 16:43:17 02/01/06(10)
      - Re: Cluster oxide in Inco718 - Alex Chan 14:40:31 05/01/06(9)
        Re: Cluster oxide in Inco718 - Hong Wang 21:10:40 06/01/06(8)
        Re: Cluster oxide in Inco718 - Gordon England 19:14:13 08/01/06(7)
        Re: Cluster oxide in Inco718 - Hong Wang 14:33:06 09/01/06(5)
        Re: Cluster oxide in Inco718 - Gordon England 17:26:08 10/01/06(0)
        Re: Cluster oxide in Inco718 - Alex Chan 15:44:36 09/01/06(3)
        Re: Cluster oxide in Inco718 - Hong 18:58:01 09/01/06(2)
        Re: Cluster oxide in Inco718 - Gordon England 17:09:45 10/01/06(1)
  - Re: Cluster oxide in Inco718 - Alex 02:38:09 21/12/05(0)
HVOF_ Cooling Hole Masking - Sathita Singjam 09:26:52 07/12/05(1)
- Re: HVOF_ Cooling Hole Masking - Gordon England 16:16:05 07/12/05(0)
Deposition of Alumina by CVD - Muthukumar 10:46:38 06/12/05(0)
surface energy - ICEWISE 16:28:05 05/12/05(0)
stop Zirconia from cracking - NADER 01:38:41 05/12/05(1)
- Re: stop Zirconia from cracking - Gordon England 15:31:43 05/12/05(0)
coating - Anup Rajurkar 07:01:58 03/12/05(1)
- Re: coating - Gordon England 14:25:28 03/12/05(0)
Off Topic : All Engineers United - Crazy Engineer 14:51:50 02/12/05(0)
Ceramic coatings has microcracks - Canan Bar 14:45:46 02/12/05(1)
- Re: Ceramic coatings has microcracks - Gordon England 15:09:21 03/12/05(0)
TBCs on C-C fiber - Tang 04:37:42 30/11/05(0)
coating homoginization - Sathita Singjam 09:51:05 29/11/05(7)
- Re: coating homoginization - Gordon England 15:32:01 03/12/05(6)
  - Re: coating homoginization - Sathita Singjam 02:06:06 06/12/05(4)
    - Re: coating homoginization - Gordon England 15:07:56 06/12/05(3)
      - Re: coating homoginization - Sathita Singjam 09:16:12 07/12/05(2)
        Re: coating homoginization - Gordon England 16:07:00 07/12/05(1)
        Re: coating homoginization - Hong Wei Wang 17:23:02 13/12/05(0)
Forging of Turbine Blades - Cliff Smith 01:50:41 29/11/05(0)
Ceramic coating - Hugo Alarcon 10:12:26 25/11/05(3)
- Re: Ceramic coating - ram chattopadhyay 06:58:15 26/11/05(2)
  - Re: Ceramic coating - Gordon England 15:49:28 03/12/05(1)
price and order - Mr.Ramin Pouryahya 10:21:42 24/11/05(0)
Freon Service- Corrosion and Wear resistance - Dilys Henry 18:14:22 15/11/05(1)
problems in finishing carbide coated shafts - jon 18:34:45 14/11/05(2)
- Re: problems in finishing carbide coated shafts - ram chattopadhyay 06:59:19 01/12/05(1)
  - Re: problems in finishing carbide coated shafts - Gordon England 16:04:28 03/12/05(0)
Need to repair cylinder bore ID on alloy block - Erik Berg 02:43:50 12/11/05(2)
- Re: Need to repair cylinder bore ID on alloy block - D. Novotny 17:54:12 18/02/06(0)
- Re: Need to repair cylinder bore ID on alloy block - ram chattopadhyay 06:54:46 26/11/05(0)
Hard Chrome Plating Problem - Tim Collier 08:03:05 10/11/05(2)
- Re: Hard Chrome Plating Problem - Ian Collins 12:01:09 09/03/06(0)
- Re: Hard Chrome Plating Problem - Jonathan Padilla 16:09:33 16/11/05(0)
Carbon Fiber - Marco Caliari 06:57:04 10/11/05(2)
- Re: Carbon Fiber - Gordon England 16:17:15 03/12/05(0)
Cr2O3 Coated rolls - Thomas Metz 10:22:15 09/11/05(3)
- Re: Cr2O3 Coated rolls - Joris 18:28:14 05/01/06(0)
- Re: Cr2O3 Coated rolls - JAMIE HOLT 12:14:37 21/11/05(0)
- Re: Cr2O3 Coated rolls - Dr. Tang 04:53:32 21/11/05(0)
Looking for UK supplier of Aluminium Powder >£3.80 per kg - Peter 10:33:44 08/11/05(2)
- Re: Looking for UK supplier of Aluminium Powder >£3.80 per kg - adam 17:33:41 18/04/06(1)
  - Re: Looking for UK supplier of Aluminium Powder >£3.80 per kg - Paul Vidler 13:16:49 09/06/06(0)
Teflon paint(seal) for ceramic coating - Ahmet B 12:01:19 02/11/05(7)
- Re: Teflon paint(seal) for ceramic coating - A Amini 17:52:23 15/03/06(0)
- Re: Teflon paint(seal) for heat roller coating - roni irawan 05:49:25 14/03/06(1)
  - Re: Teflon paint(seal) for heat roller coating - Huwiler Computer Service 08:11:13 12/04/06(0)
K701 Properties - Paul Sheehan 10:58:03 31/10/05(1)
- Re: K701 Properties - Gordon England 00:48:15 01/11/05(0)
alumina coating - A Shah 20:37:47 27/10/05(2)
- Re: alumina coating - Rayudu Girish Rao 17:43:12 29/10/05(1)
  - Re: alumina coating - Jonathan Padilla 21:52:28 02/11/05(0)
Automated Indexing Table - K. JASIHANKAR 08:55:46 27/10/05(1)
- Re: Automated Indexing Table - Rayudu Girish Rao 17:47:56 29/10/05(0)
Etchant for hydroxyapatite - vivek 12:22:28 25/10/05(1)
- Re: Etchant for hydroxyapatite - Gordon England 15:40:18 05/12/05(0)
film/coating with certain type - ARI ZONI 12:14:48 20/10/05(0)
Metallisation vs. Galvanisation - Tolga DIRAZ 08:34:21 20/10/05(3)
- Re: Metallisation vs. Galvanisation - charles 15:54:21 10/05/06(1)
  - Re: Metallisation vs. Galvanisation - Gordon England 20:13:30 14/05/06(0)
- Re: Metallisation vs. Galvanisation - Gordon England 01:06:38 01/11/05(0)
removal of chromium from tannery waste - afzal 07:49:10 20/10/05(0)
Literature for Plasma spray process - Madila Awalini 02:47:03 13/10/05(1)
- Re: Literature for Plasma spray process - Gordon England 17:28:09 13/10/05(0)
Enquire regarding Laser Hardning - Chandra Mouli 16:44:26 12/10/05(0)
can al broze be mixed with magnessium - K.V.Subrahmanyam 19:08:01 10/10/05(0)
Ceramic Spray on HT Steel in furnace - Harry Wagoner 22:16:42 04/10/05(1)
- Re: Ceramic Spray on HT Steel in furnace - ram chattopadhyay 10:35:05 09/10/05(0)
Vickers Hardness - John Beville 22:11:47 04/10/05(6)
- Re: Vickers Hardness - ram chattopadhyay 07:40:01 05/10/05(5)
  - Books - John Beville 18:03:52 05/10/05(1)
  - Re: Vickers Hardness - John Beville 15:20:09 05/10/05(2)
    - Re: Vickers Hardness - ram chattopadhyay 10:22:03 16/10/05(0)
    - Re: Vickers Hardness - Gordon England 18:52:13 05/10/05(0)
Abrasion tester - Mark 16:04:37 03/10/05(0)

Message Archive Aug-Sep 2005

Message Archive Jun-Jul 2005

Message Archive May 2005

Message Archive Mar - Apr 2005

Message Archive Jan - Feb 2005

Message Archive Nov - Dec 2004

Message Archive Oct 2004

Message Archive Aug - Sep 2004

Message Archive May - Jul 2004

Message Archive Mar - Apr 2004

Message Archive Jan - Feb 2004

Message Archive Dec 2003

Message Archive Oct - Nov 2003

Message Archive Aug - Sep 2003

Message Archive Jun - Jul 2003

Message Archive Apr - May 2003

Message Archive Jan - Mar 2003

Post A Message!

Gordon England Surface Engineering Forum

Please go to the new Surface Engineering Forum as this old message board is a read only archive. Please copy and paste relevant information or link to the page if you wish to reactivate a thread on the new forum.

© Copyright Gordon England